WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual

by

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up

PRODUCT FEATURES:

– Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM display screen for shared linking of functions from most Smartphones to the OEM Screen.
– Provides an Audio/Video input that can also be used for a camera.
– Includes a USB input to play Audio and Video files.
– Provides a virtual remote control via a smartphone wifi connection.
– Dual band (5GHz and 2.4GHz) Wifi capability for clear connection.
– Includes HMDI output for high quality video.
– Works with Facetime, Navigation apps, Skype, E-mail, text, and other apps.
– Streams Youtube® videos.

WORKS WITH:

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - WORKS WITH

PARTS INCLUDED:

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - PARTS INCLUDED

INSTALLATION DIAGRAM:

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - INSTALLATION DIAGRAM

INSTALLATION INSTRUCTIONS:

THE AV INTERFACE:

  1. Remove the factory radio from the dashboard and unplug the factory connectors from behind the radio.
  2. Mate the T-Harness connections to the factory connectors. (Make sure all connectors are properly seated into the interface and into the radio.)
  3. Connect the audio and video source to the female RCAs on the WVINS-07 T Harness.
  4. Test the system before putting back the radio.

THE WIFI INTERFACE:

  1. Connect the 18-Pin power/video cable to the Wi-Fi Interface module.
  2. Connect the antenna leads to the module.
  3. Connect the RED power lead to +12V ACC and the BLACK wire to Ground.
  4. Connect the BLUE wire to +12V to trigger the optional video input feature. The video input can be connected to a camera source. A toggle switch (not included), wired between the BLUE wire and +12V can be used to switch ON
    or OFF the video input feature.
  5. An HDMI video output is available for HD video resolution. Connect to a screen that has an HDMI input. The HDMI cable is not included in the kit.
  6. If the USB input feature will be used, you can use the virtual remote control on your smartphone to control the USB functions. See VIRTUAL REMOTE section for details. Extended the USB cable to an easily accesible location.
  7. Plug in the Composite RCA output of the WVI-H harness to the WVINS-07 AV input.
  8. Set the Wifi Module to either 5GHz or 2.4GHz by pressing the MODE button on the Wifi module. You can see which band you are using at the lower left hand side of the screen while in the home screen (with Crux logo). Test which band works well in your vehicle.

SETTING YOUR DEVICE:

With the WVI-H module ON and READY:

For iOS devices:

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - NOTES

Open settings > Select Wi-Fi > Under ‘Choose Network’ Select “Crux WiFi ***”

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - Open settings

After connecting to Crux Wifi, select “SCREEN MIRRORING” from the Control
Center and tap Crux Wifi ***. To access Control Center, on iPhone X, pull down
from the upper right corner of the screen, on other iPhone models, pull up from the bottom of the screen.

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - After connecting to Crux Wif

For Android devices:

From the drop down drawer, press “Quick Connect” > Select “Crux Wifi ***”

Notes:
1) Make sure the “Power Saving Mode” is turned off.
2) Make sure Quick Connect is updated to the latest version.

VIRTUAL REMOTE CONTROL:

The WVI-H comes with a Virtual Remote Control via a Wifi connection. To access the virtual remote control, make sure that the phone is connected to Crux Wifi ***. Open your web browser and type in the following on the address bar: 192.168.59.254

The Virtual Remote control will open. Use the virtual remote control to PLAY, PAUSE, STOP, TRACK UP/DOWN, VOLUME UP/DOWN, etc.

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - The Virtual Remote control will open.

Plug in a USB thumb drive to the USB cable port of the WVI-H. Tap OPTIONS on the Vritual Remote Control to select MOVIES, PHOTOS, MUSIC, etc. Use the remote to play/pause or skip tracks.

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - Plug in a USB thumb drive to the USB cable port of the WVI-H.

Tap SETUP to change settings on VIDEO, SYSTEM, NETWORK, and AUDIO. We recommend NOT to change any SYSTEM settings as this would interfere with the WVI-H functionality.

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - Tap SETUP to change settings on VIDEO

MIRRORING:

The mirroring connection uses a direct Wi-Fi connection to transfer the Audio and Video from your device to the WVI-H module. This does not require an active network. If your smartphone has the Screen Time Out enabled and your display goes to sleep mode, you will no longer see the image on the screen. Deactivate this feature for continuous viewing.

OPERATING INSTRUCTIONS:

  1. Turn on the radio and select AUX mode.
  2. Press the “END CALL” button on the Steering Wheel Controls for 2 to 3 seconds to toggle VIDEO IN.
  3. Video will now be playing on the screen and audio will be heard from the speakers.
  4. Install the radio back into the dashboard.

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - OPERATING INSTRUCTIONS

VEHICLE APPLICATIONS:

NISSAN

2014 – 2015          Frontier
2014 – 2015          NV200
2014 – 2015          Sentra Versa
2014 – 2015          Xterra

WVINS-07 Wi-Fi Connectivity for Select Nissan Vehicles 2014-Up User Manual - Crux Interfacing Solutions