VEVOR HCL-02 Cleaning Gun User Manual
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.
MODEL: HCL-02
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
INSTRUCTIONS
- Please read this instruction book carefully before you start using the machine. You will find many useful hints which will help you to keep the machine always in its first-class condition.
Attention!
Air compressor should between 0.6-0.92MpaMay cause damage and peril if the pressure exceed 0.92MpaThe liquor must be neutral organic Solvent shall not be used,either.
Note: The model selection of the air compressor should meet the following parameters: the exhaust volume should be >200L/min, the gas storage tank should be >70L, and the power should be >2500W
Attention!
- Return to maintenance if you have any abnormal and damage when use
- We won’t service if you don’t use original accessories and Professional consumables.
- We won’t service if you use it in a wrong way or do not pass our technological guidance, dismantled and installed the part of the apparatus at will.
Attention!
Keep the gun clean from the liquor which is detained,otherwise,it will corrode the inner side of the bottle.
Cleaning: put the nozzle into clean water, close the liquor valve , pull the trigger and then it will wash automatic, get the nozzle out , dry it, and maintain ventilation without direct sunlight.
Note: 1. Only applicable to cleaning agents and cleaning solutions, cannot use glue etc.
The cleaning concentration should not be too thick, otherwise it will affect the effect of use.
Manufacturer: Shanghai muxin muye youxian gongsi
Address: Shuang cheng lu, 803 nong,11 hao, 1602A-1609shi, Baoshan qu, Shanghai 200000, CN.
Imported to AUS: SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
YH CONSULTING LIMITED. C/O YH Consulting
Limited Office 147, Centurion House, London
Road, Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt am Main.
Technical Support and E-Warranty Certificate www.vevor.com/support