User Manual of TOPMAQ OCS-D Small Crane Scale

by 
User Manual of TOPMAQ OCS-D 
Small Crane Scale

Small Crane Scale User’s Manual

OCS-D

Notes

Please read the user’s manual first and keep it

In order to protect the scale precission please pay attention to below:

  • Do not Overload. It will broken the load cell and may be can hurt the people when it short
  • Do not load the goods on the hook for long time ,it will shorten the machine life and precission
  • Check the hook and Ring
  • Check the power
  • Do not using in the raining and thunder
  • Do not prepare it by yourself when it is broken. Take it back to service

Specification

 

 

TOPMAQ OCS-D Small Crane Scale - Specification

TOPMAQ OCS-D Small Crane Scale - Specification 2

Capacity and Divison

 

 

TOPMAQ OCS-D Small Crane Scale - Capacity and Divison

TOPMAQ OCS-D Small Crane Scale - Capacity and Divison 2

Operation Guide

  • Power on
    Press power icon for 1 second ,it will be turn on.Display ( OC-5 Ur 1.2 500.0 99999 88888 77777 66666 55555 44444 33333 22222 11111 00000 dc6.24 0.0 – )
  • Power off
    Press power icon for 1 second ,it will be turn offDisplay “OFF”
  • Tare/Zero 

    When need the function for Zero or Tare
    Press Zero/Tare ,the light Zero or the light Tare will on
    +-2% F.S is Zero light on
    Ohters is Tare light onWhen the stable light is off and on hold function,the ZERO/TARE function is can not using

    The ZERO/TARE function will reduce overload KG.
    Overload alarm: 100%F.S kg – Zero/Tare KG+9e

  • HoldPress Hold/UNIT key, it will lock the digital weight ,the light of stable and hold be on
    This moment take down the goods the digital weight still display on the scale.
    The stable zero and hold light on
    Press Hold /UNIT again cancel the lock function
  • UnitPress HOLD/UNIT key for 2second to change to LB, press HOLD/UNIT 2 second again to N,then press HOLD/UNIT 2 second again to KG

SIMPLE TROUBLE SOLUTION

 

 

TOPMAQ OCS-D Small Crane Scale - SIMPLE TROUBLE SOLUTION

TOPMAQ OCS-D Small Crane Scale - SIMPLE TROUBLE SOLUTION 2

Calibration and Setting up

KEY： ON/OFF HOLD/UNIT TARE/ZERO
SET： Press [ZERO/TARE] all the time ,press [ON/OFF] 2 times quickly.
Display： 《POT》Press [ZERO] to choose,press [HOLD] to confirm.0/0.0 / 0.00 /0.000/
《3000》Capacity，use [ZERO] and [ON/OFF] to change, press [HOLD] to confirm.
《Fd》 Division Press [ZERO] to choose,press [HOLD] to confirm.
《CAL ?》Means there is no any goods on the plate of the scale 0 kg , [HOLD] to confirm.
《26000》the check code for the 0 kg
《LOAd》mean load the weight to check the weight.put any weight on the plate, press[HOLD] to confirm.
《XXXXX》Auto checking
《25．0》means need input the kg of the weight. use [ZERO] and [ON/OFF] to change, press [HOLD] to confirm 《done》 means finish now.