User Guide of urmet H.265 NVR Video Recorder
Kit contents
The kit contains all the devices, cables and software you need to install, configure and operate the system. No special skills are needed for installation.
A) 2 wi-fi cameras
Suitable for wall-mounting, complete with infrared illuminators for night vision, white light
B) LED and PIR
2 camera power units
For connecting the cameras to the mains of the building
C) 1 H.265 8 channels NVR ref.1098/820
8 channel net video recorder with internal hard disk for video recording
D) 1 remote control and 1 mouse
For programming and controlling NVR operation
E) 1 power unit for NVR
For connect the NVR to the mains of the building
F) 1 CD
IMPORTANT: Wi-Fi Performance is affected by several factors, the functional performance of the described product may attenuate when there are INTERFERENCES caused by wireless routers, 4G or higher Mobile Cellular Base Stations, Radars, Microwave oven and Substation. Moreover the distance between the NVR and the IP Cameras to be linked will affect the wireless performance. For these reasons, we recommend limiting the maximum number of channels to 6.
How to view images
The images filmed by cameras or stored on the hard disk of the NVR can be displayed by connecting an HDMI monitor or a colour TV with the latest HDMI input to the NVR.. Alternatively, the NVR can be connected to the home LAN and, if the latter is connected to the Internet, you can control the system remotely from a PC, smartphone or tablet using specific apps.
MONITOR CONNECTED TO THE NVR
REMOTE CONNECTION OF THE NVR TO THEROUTER
https://apps.apple.com/tr/app/urmet-view/id1474235313
https://play.google.com/store/apps/details?id=com.iuvsplus.client&hl=en&gl=US&pli=1
General wiring diagram
Starting from the rear panel of the NVR, this diagram shows how to connect all system components.
- NVR URMET 1098/820
- URMET WI-FI CAMERA
- HDMI OUTPUT
- USB INPUT
- CAMERA POWER UNITS
- NVR POWER UNIT
- LAN INPUT
- POWER INPUT NVR
- SLOT SD
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Control and configuration via monitor or TV
If you have chosen to use the kit by connecting a monitor or colour TV with next-generation HDMI port to theNVR, you can use the NVR menu to configure the system and view the images. You can interact with the system using the mouse included.
Control and configuration via PC
By connecting the NVR to your home LAN via a 10/100 Mbps Ethernet cable (not included) connected to the RJ45 port or via WiFi connection to your home WiFi router, you can control the system from your PC or remotely, if the LAN is connected to the web.
After having configured NVR and cameras on the network, the NVR can be connected using the Internet browser of the PC. The PC workstation must be connected to the LAN to which the NVR is connected. Install the “Device Search” software on the CD supplied with the product on a PC with Windows operating system connected to the same network as the NVR to connect the NVR. At the end of installation, run the software which detects NVR on the LAN and located it on the list. At this point, click on the IP address of the NVR shown on the list.
For more information, see the instruction manual of the NVR.
It is also possible to connect to one or more NVR at the same time using the URMET UVSPRO client software, available on the CD provided with the product.
For more information, see the instruction manual of the NVR.
Specification of the WiFi transmission of the camera and of the NVR
- Transmission standards: 802.11 b/g
- Frequency bands in which the radio equipment operates: 2412-2472Mhz
- Maximum radiofrequency power transmitted in the frequency bands in which the radio equipment operates: 17 dBm
What to do if…
- I changed the password, but I have forgotten it. How can I access the system?
Contact customer care to recover the password. - The video recorder is on but nothing appears
Check the power supply and that everything is working. - The video recorder tends to overheat
You are advised to position the NVR in a well-ventilated place away from sources of heat to promote stability and working long-life of the device. - The recording function is not working
Check that the current screen is in Play mode to close playback mode and open the [Record] function. - Can I record while playing a recording back?
Yes. You can record during playback. - Can I delete recorded files from the videorecorder?
For the sake of data integrity it is not advisable to delete the recorded files directly on the device. Select the “format hard disk” function to delete all files permanently. - Why does the device keep buzzing?
Check whether the motion detection function is on and whether the system has detected motion. Make sure that the hard disk is working correctly and that there is enough available free space; check for video signal loss. - I cannot use the [Stop] function. Why?
Set the time setting to [No Record] to stop a programmed recording
CORRECT DISPOSAL OF THIS PRODUCT
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste
electrical and electronic equipment (WEEE)The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Maximum radio power transmitted
Antenna 0
Max 17.33 dBm 802.11b
Max 15.78 dBm 802.11g
Max 15.72 dBm 802.11n (HT20)
Max 15.65 dBm 802.11n (HT40)
Antenna 1
Max 17.08 dBm 802.11b
Max 15.56 dBm 802.11g
Max 15.86 dBm 802.11n (HT20)
Max 15.65 dBm 802.11n (HT40)
Totale/Total
Max 18.6972 dBm 802.11n (HT20)
Max 18.66 dBm 802.11n (HT40)
The manufacturer, URMET S.p.A., declares that the radio equipment types: KIT WiFi 1098/820 is in compliance with the Directive
2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.urmet.com.
Quick guide and complete user manual of the product are available at the following QR code.
QuickguideandcompleteusermanualoftheproductarealsoavailableforDOWNLOADfromtheURMET website under the section USER MANUALS.
Sales Network
For assistance and information about Urmet products and systems you can scan this QRcode with your smartphone orvisit
www.urmet.com >> Contacts >> Export Sales Network
Urmet S.pA. reserves the right to make changes to its products at any time, without prior notice.
Released in December 2021.
All Urmet products bearthe mark
Made in China to Urmet specifications.
Customer Care
Italia: 011 23 39 810
Export Dept.: +39 011 24 00 250/256
URMET S.p.A.
Via Bologna, 188/C | 10154 Torino (ITALY)
www.urmet.com |info@urmet.com