Timex 1440 SPORT Watch Instructions & Manuals

Table of Contents

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203. Please read instructions carefully to understand how to operate your Timex®
watch.

FEATURES AND BASIC OPERATION

Your model may not have all of the features described in this booklet.
• Date with MM-DD (month/day) format
• 2 time zones
• Alerts with audible tone
• Optional hourly chime
• 24-hour stopwatch
• Daily alarm
• INDIGLO® night-light
Press MODE repeatedly to step through modes: Alarm, Stopwatch and 2nd
Time Zone. Press MODE to exit current mode and return to Time mode.

TIME

To set time and date:
1) With time and date showing, press SET and hold for 2 seconds.
2) Seconds flash. Press START/STOP to set seconds to zero.
3) Press MODE. Hour flashes. Press START/STOP to change hour, including
AM (no symbol) and PM.
Note: Press and hold START/STOP to rapidly advance changes.
4) Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
5) Press MODE. Year flashes. Press START/STOP to change year.
6) Press MODE. Month flashes. Press START/STOP to change month.
7) Press MODE. Date flashes. Press START/STOP to change date.
8) Press SET, at any step, to exit and save settings.
With time and date showing, press SET to switch between 12- or 24- hour time
format.
Date (day of month) appears in upper part of display in Time mode. Press and
hold START/STOP to see month, date, and year in large digits.

ALARM

Watch has a daily alarm. Press MODE repeatedly until AL appears.
To set alarm:
1) Press SET. Hour flashes. Press START/STOP to change hour, including AM (no symbol) and PM.
2) Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
3) Press SET, at any step, when done setting.
To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings. Alarm icon appears when alarm is on. CHIME icon appears when hourly chime is on – watch will chime on every hour.
When alarm sounds, press any button to silence. If no button is pressed, alarm will sound for 60 seconds.
Alarm repeats daily unless turned off.

STOPWATCH

This mode provides a stopwatch function for timing events. Press MODE repeatedly until SP appears.
To start, press START/STOP. Stopwatch counts up by hundredths of a second up to 30 minutes, then by seconds up to 24 hours before starting over.
To stop, press START/STOP.
To resume, press START/STOP, or to reset (clear) stopwatch, press SET.
While stopwatch is running, press SET to take lap/split and see your time up to that point. Display freezes while stop watch continues to run. Press SET to resume display of running stopwatch.
Stopwatch continues to run if you exit mode.

TIME 2

Watch can display time in a second time zone. Press MODE repeatedly until T2 appears.
To set 2nd time zone’s time:
1) Press SET. Hour flashes. Press START/STOP to change hour, including AM (no symbol) and PM.
2) Press MODE. Minutes flash. Press START/STOP to change minutes by 30 from minutes in Time mode. Seconds are the same as in Time mode and can only be set there.
3) Press SET, at any step, when done setting.

INDIGLO® NIGHT-LIGHT

Press INDIGLO® button to illuminate watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates entire watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking is indicated.

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. If
applicable, push reset button when replacing battery. Battery type is indicated
on caseback. Battery life estimates are based on certain assumptions regarding
usage; battery life may vary depending on actual usage.
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP
LOOSE BATTERIES AWAY FROM CHILDREN.