StyleWell FCS80524-ST Springdale 3PC Chat Set User Guide

Questions, problems, missing parts?
Before returning to the store, call Style Well Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday.
1-877-527-0313
THANK YOU
We appreciate the trust and confidence you have placed in Style Well through the purchase of this set. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Style Well!
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: This set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for normal outdoor use. However, the manufacturer recommends storing and/or covering this product when any formidable/severe weather is approaching.
WARNING: Do not locate this product near open flames. Do not use this product as a support. Do not shake, lean or climb on the product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is not intended for commercial use and will void the warranty.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
- Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Do not move the set while it is occupied. Failure to obey this caution could result in injury.
- Do not rock in the chairs as you may fall and cause serious injury.
- This table is not intended to support an umbrella. Umbrellas must have a suitable base or stand.
![]()
CAUTION: Do not locate the product near any heat sources.
![]()
WARNING: Weight limit for the chair is 250 lbs (113.39 kg).
![]()
WARNING: Do not place heavy objects on the chair or table.
![]()
WARNING: This set is heavy, and may require two adults for safe assembly.
![]()
WARNING: Never use this product as a support. Do not shake, lean, or climb on the product at any time.
![]()
WARNING: When not in use, secure the product in a cool and covered location.
![]()
WARNING: Please keep children out of the assembly area before assembly.
Warranty
1 YEAR FRAME AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for one year, and the fabric to have a one year limited warranty.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HOMEDEPOT.COM.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.


CHAIR PACKAGE CONTENTS

TABLE PACKAGE CONTENTS

Chair Assembly
- Inserting the Support Tubes into the Sling Bucket
▢ Place the sling bucket (D) on a soft surface.
▢ Insert the support tubes (B) into the top and bottom of the sling bucket (D) in place, as shown below.

- Attaching the Arm to the Support Tubes
▢ Attach the arm (A) to the support tubes (B) using M6x50 combination bolts (AA), as shown below.
▢ Do not tighten the bolts at this step.

- Attaching Another Arm to the Assembled Support Tubes
▢ Attach another arm (A) to the assembled support tubes (B) using M6x50 combination bolts (AA), as shown below.
▢ Once all of the bolts are in place, fully tighten the bolts using the allen wrench (BB).

- Inserting the Sling Support Bars to the Sling Bucket
▢ Thread the sleeves on the sling bucket (D) through the armrest slots.
▢ Insert the sling support bars (C) into the sleeves on the sling bucket (D) and secure them in place, as shown below.

- Checking the Chair
▢ Place the cushion (E) to finish the chair assembly.
▢ Ensure all connections are secure before use.
▢ Repeat these assembly steps for another chair.

Table Assembly
- Attaching the Table Leg 1 to the Table Top
▢ Place the table top (F) upside down on a soft surface.
▢ Attach the table leg 1 (G) to the table top (F) by inserting the M6x25 twist knobs (BB), as shown below.

- Attaching the Table Leg 2 to the Table Leg 1 and the Table Top
▢ Insert the bump of the table leg 2 (H) to the hole of the table leg 1(G) in place.
▢ Attach the table leg 2 (H) to the table top (F) by inserting the M6x25 twist knobs (BB), as shown below.
▢ Once all twist knobs are in place, fully hand-tighten the twist knobs.
NOTE: If needed, use the allen wrench (CC) to assist in tightening the twist knobs.

- Checking the Table
▢ Turn the table right side up.
▢ Ensure all connections are secure before use.

Care and Cleaning
▢ For best results, clean the frame and cushions with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
▢ Do not clean with abrasive materials, bleach or solvents.
▢ Store the set in a dry, sheltered place when not in use.
▢ Keep the set away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.

Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
Retain this manual for future use.
