Rollei Nikon Z6 L-Bracket
Instruction Manual
Rollei L-bracket
This L-bracket is compatible with Nikon‘s Z6 and Z7 cameras and can be attached to both cameras equally. With the L-bracket, changing your camera from landscape to portrait format is totally easy. The field of application is very broad, especially in studio photography, landscape photography and macro photography. With our camera specific L-bracket you have the possibility to use your Nikon Z6 or Z7 in its full functional range. The angle can thus remain permanently on your camera and is compatible with all tripod heads that use the Arca-Swiss standard.
Product highlights
- Full access to battery compartment
- Access to camera controls and connections
- Switch quickly from portrait to landscape format
- Additional thread for mounting accessories
- Anti-slip coating and safety pin for precise assembly
- Arca-Swiss compatible
- Made of aluminum
Components of the L-bracket
- 1/4 inch thread for connecting accessories such as microphones, LED lights, etc.
- Arca-Swiss compatible vertical rail
- 1/4 inch screw for mounting the camera
- Rubber pad for more stability
- Safety pin for correct fit
- Arca-Swiss compatible horizontal rail
- Opening for battery compartment
- Recess for carrying or hand strap
- Mounting screw for adjusting the vertical rail
- Allen key
Rollei L-bracket
Mounting on the camera
- Clean the bottom of your camera before installation.
- The L-bracket for the Nikon Z6/Z7 can only be mounted in one direction so that the vertical rail is on the right side of the camera when you look at the camera from the front (as shown in the picture).
- Make sure that the safety pin is inserted into the recess provided on your camera. This ensures that the L-bracket is correctly positioned.
- Use the enclosed Allen wrench to connect the L-bracket to the camera. Then tighten the screw.
- Make sure that the L-bracket is firmly attached to your camera. Your camera with L-bracket is now ready for use.
General notes
- The vertical rail can also be fixed, for example, 1 cm away from the camera body. Depending on the connection cable used, this may be necessary.
- If the L-bracket is mounted, you can open the battery compartment of the camera and change the battery with the bracket mounted.
- Do not overtighten the mounting screw to avoid damage to your camera.
- Make sure that you hold the camera firmly in your hands while mounting the L-bracket.
Technical specifications
Rollei GmbH & Co. KG
In de Tarpen 42
22848 Norderstedt
Service-Hotline:
+49 40 270750277