Please read the user manual before using the product.
Specifications
Model: PLM03ZM
Ba ery type: Li-polymer
Cell capacity: 10000mAh 3.85V (38.5Wh)
Operating temperature: 0°C~45°C
Dimensions: 128.5×75×12.6mm
Input: 5.0V 2.0A 9.0V 2.0A 12V 1.5A
Output: 5.0V 2.4A 9.0V 2.0A 12V 1.5A
Charging time: approx. 3.5 hours (9V/2A or 12V/1.5A adapter, standard cable), approx. 5.5 hours (5V/2A adapter, standard cable)
Product Introduction
Thank you for choosing Mi Power Bank Pro. The product is a high-capacity portable charger that uses Li-polymer batteries and TI chips for a safe, efficient, and compatible user experience.
Product Features
Safety: Mi Power Bank Pro has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions. Efficiency: Supports fast charging and discharging at 5.0V 2.4A 9.0V 2.0A 12V 1.5A output. Compatibility: The product has a built-in USB charging controller, compatible with most smartphones, tablets, and devices. It supports mainstream fast charging devices, and can boost to 9V/12V.
Quality: Li-polymer bat teries and TI chips.
Note: The Power check bu on is not a Power bu on. Mi Power Bank Pro detects charging and discharging automatically. The Power indicator turns off 2 minutes a er discharging is completed.
Charging
Connect with Mi AC Adapter to charge Mi Power Bank Pro. The indicator shows charging conditions as follows:
Notes:
- Please make sure to fully charge Mi Power Bank Pro on its first use.
- When charging a device with Mi Power Bank Pro, please check whether your device displays the ba ttery charging icon to confirm that Mi Power Bank Pro is working properly.
- When charging Mi Power Bank Pro or charging a device with Mi Power Bank Pro, please be sure to use the right charging cable.
- When all indicator LEDs lights go out, Mi Power Bank Pro is in low power mode. Please recharge as soon as possible.
- When charging a device with Mi Power Bank Pro, the device will use Mi Power Bank Pro’s batt ery first.
- Once your device is fully charged, please disconnect it from Mi Power Bank Pro to avoid further discharge.
- When the product enters protection mode (LEDs don’t light up a er pressing the Power check bu on) due to output short circuit or other reasons, please charge Mi Power Bank Pro with an external charger to resume.
Warnings
- Mi Power Bank Pro contains Li-ion ba eries. Do not open the casing to avoid ba ery damage or other dangers.
- Please do not dismantle, press, puncture and short circuit Mi Power Bank Pro, or expose the product to liquids, fire, or environments where temperature is higher than 60°C (140°F).
Discharging
Connect with Mi Power Bank Pro to charge your device. The indicator shows discharging conditions as follows:
Small current discharge: when Mi Power Bank Pro is not charging, double press the Power check bu on to enter Small current discharge mode to charge small devices, such as Bluetooth headphones and smart bands. The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank Pro has entered Small current discharge mode.
To exit Small current discharge mode, press the Power check bu on once.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
About anti-counterfeit labels
Anti-counterfeit labels are placed on the outer packaging of every certified 10000mAh Mi Power Bank Pro. Please scratch the coating to see the verification code, and check if the product is genuine on this website: http://www.mi.com/verify
Principal: Xiaomi Communications Co., Ltd.
Manufacturer: Zimi Corporation (a Mi Ecosystem company)
Address: 159 Chengiang Road Unit A913, Jiangyin City, Jiangsu, China
To promote environmental protection, Xiaomi avoids excessive packaging.