KERBL 80581 145x30cm Car Safety Gate Instruction Manual
Parts List
1. Insert part C into part A (fig. 1). The whole thing on the left and right side. It is important that part C is inserted parallel to the headrests.
2. +3. Check the width behind the headrests in the car beforehand. Place part A and part B one above the other on the left and right sides (2 x part B) and secure with part D (4 x part D per side). Note the maximum width in the car.
4. Check what length of screw you need for your headrests (distance between headrests and car guard) beforehand. Remove the cap from part E and insert the selected screws F (x 2) through the screw cap part E (x 2).
5. + 6. Run the screw cap including screws through part C and screw in with part G(x2)
7. Place the car guard behind the headrests and secure it with part G. Tighten the screws with the screw cap (part E). You can now somewhat adjust the exact width of the guard (2 x part B) a second time.
Kerbl France Sarl 3 rue Henri Rouby, B.P 46 Soultz 68501 Guebwiller Cedex, France Tel. +33 3 89 62 15 00 Fax +33 3 89 83 04 46
E-Mail info@kerbl-france.com www.kerbl-france.com