Installation Guide of ARBOR EmETXe-i92U0 COM Express Compact Type 6 CPU Module
♦ Technical Support
If you have any technical difficulties, please consult the user’s manual first on our website.
http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still can not find out the answer.
E-mail: info@arbor.com.tw
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Copyright© 2022 All Rights Reserved.
4041920000100P
COM Express supports seven pin-out Type applying to Basic and Extended form factors:
Module Type 1 and 10 support single connector with two rows of pins (220 pins)
Module Type 2, 3, 4, 5 and 6 support two connectors with four rows of pins (440 pins) Connector placement and most mounting holes have transparency between Form Factors.
The differences among the Module Type 6 and EmETXe-i92U0 are summarized in table below:
Packing List
Before you begin installing your single board, please make sure that the following materials have been shipped:
If any of the above items is damaged or missing, contact your vendor immediately.
Specifications
Ordering Information
Optional Accessories
Driver Installation
To install the drivers, please visit our website at www.arbor-technology.com and download the drivers from the Download Center.
Board Dimensions
Connectors Quick Reference
Top Side
Bottom Side
FAN1: Fan connector
Connector type: Wafer 3-pin 1.25mm 85204-03X0L
MIPI DSI: MIPI DSI connector (by OEM request)
Connector type: Wafer 35-pin
COM Express AB Connector (bottom side)
COM Express CD Connector (bottom side)
Block Diagram
