HPS 827-682 Performance Air Intake Kit Installation Guide
Lexus 2013-2020 GS350 3.5L V6
Lexus 2016-2025 IS300 3.5L V6
Lexus 2014-2025 IS350 3.5L V6
Lexus 2016-2025 RC300 3.5L V6
Lexus 2015-2025 RC350 3.5L V6
Installation Instructions
For technical inquiries please email us at tech@hpsperformance.com
In the email, please include the following information for faster response:
- Year / Make / Model / Engine of your vehicle.
- If it is a fitment issue, please include pictures showing the fitment problem.
- If there are missing parts, please list the part number(s) from the bill of materials on the 2nd page.
- Optional but recommended – Your contact phone number and preferred call back time.
You can also give us a call via 626-747-9200 for tech support Monday-Friday, 9:00am-5:00pm Pacific Time.
Bill of Materials
Kit Number: 827-682
- Before installing any parts of this intake kit, please read the instructions thoroughly.
- Verify the contents of this intake kit before disassembling your vehicle.
- Report any defective or missing parts to HPS directly. The HPS dealer you purchased this product from might not have the replacement parts you need.
- Installation requires moderate mechanical skills. A qualified mechanic is highly recommended.
- Do not attempt to install the intake kit while the engine is hot.
- This installation may require the removal of coolant lines that may be hot.
- For technical inquiries, please email us at tech@hpsperformance.com
PLEASE READ CAREFULLY BEFORE INSTALLATION!
This installation is not for the novice customer. Install this product with EXTREME caution! Misuse of this product can destroy your engine! If you are not mechanically inclined, please have a professional automotive mechanic install this kit.
NOTE: HPS holds no responsibility for any engine damage that results from misuse of this product.
GETTING STARTED
- Turn the ignition OFF and disconnect the vehicle’s negative battery cable. If the engine has run within the past two hours, let it cool down.
NOTE: Disconnecting the negative battery cable erases pre-programmed electronic memories. Write down all memory settings before disconnecting the negative battery cable. Some radios will require an anti-theft code to be entered after the battery is reconnected. The anti-theft code is typically supplied with your owner’s manual. In the event your vehicle’s anti-theft code cannot be recovered, contact an authorized dealership to obtain your vehicle’s anti-theft code. We also highly recommend NOT discarding any stock parts after the installation.
FINAL STEPS
Once the intake has been positioned, tighten all of the clamps and secure all of the parts.
Upon completion of the installation, reconnect the negative battery terminal before you start the engine. Double check to make sure everything is tight and properly positioned before starting the vehicle.
Start the engine. Let the car idle for 3 minutes. Perform a final inspection before driving. Listen carefully for any odd noises, rattles and/or air leaks prior to taking it for a test drive. If any problems arise go back and check the vacuum lines, hoses and clamps that may be causing leaks or rattles and correct the problem.
Start the engine. Let the car idle for 3 minutes. Perform a final inspection before driving. Listen carefully for any odd noises, rattles and/or air leaks prior to taking it for a test drive. If any problems arise go back and check the vacuum lines, hoses and clamps that may be causing leaks or rattles and correct the problem.
Also available for:
Lexus 2013-2020 GS350 3.5L V6
Lexus 2016-2025 IS300 3.5L V6
Lexus 2014-2025 IS350 3.5L V6
Lexus 2016-2025 RC300 3.5L V6
Lexus 2015-2025 RC350 3.5L V6
Contact an authorized HPS Performance dealer or visit us at hpsperformance.com for more details.