Energy Music Box B3 User Guide

Table of Contents

Introduction

Thank you for purchasing this Music Box B3 Bluetooth. We hope you will enjoy it.
Portable MP3 player with Bluetooth® technology, Audio-In and rechargeable battery. Enjoy your music wirelessly from any Bluetooth®.
We recommend you to read the following user manual in order to take the most advantage from your product,on a safely way and with the best performance.

Care and maintenance

Do not expose your Music Box B3 Bluetooth to shock, dust, humidity or high temperatures.
Do not use abrasive or corrosive cleaning products.
Keep your speaker clean and dust them with a soft dry cloth.
Do not disassemble the device. Any repair must be done exlusively by qualified personnel of Energy SistemSoyntec S.A.
Be sure to keep your Music Box B3 Bluetooth turned off while not in use.
Charge the lithium battery when ran out to extend its life.

Features

General features

Transfer and enjoy your music through the wireless Bluetooth® technology.
Total compatibility with smartphones and tablets iOS, Android, Windows Mobile, BlackBerry, etc.
Freedom of sound: Listen and share your music anywhere.
Loudspeakers with acoustic enhancement system: Clear sound and rich bass.
Total output power (RMS): 6W.
Portable and compact design, allows you to take it anywhere and amplify your music.
3.5 mm “Audio-In” port: listen music with any portable player or even computer.
Bluetooth® handsfree function.
Rechargeable lithium battery.
microUSB port battery charger.

Technical features

Bidirectional Bluetooth®, 4.0 version. Up to 10 meter range.
Supports A2DP and AVRCP profiles.
Operating frequency: 2.4 GHz (2402 – 2480 MHz).
Maximum output power: < 20 dBm.
2.0 loudspeakers with acoustic enhancement system.
Total output power (RMS): 6 W.
Frequency response: 90 Hz ~ 18 KHz.
S/N ratio: >80 dB.
Built-in microphone (handsfree function).
3.5 mm “Audio-In” port.
Rechargeable lithium battery.
Rechargeable lithium battery up to 15 hours duration.*
Audio output connection.

Battery specifications

Nominal capacity: 1800 mAh.
Nominal voltage: 3.7V.
Autonomy in music player mode: 12 hours*.
Autonomy in Bluetooth mode: 10 hours.

( ) Approximate battery life. Higher volume means higher battery consumption.

Product Content

Music Box B3 Bluetooth.
Audio cable: 3.5mm.
USB 2.0 cable for battery charge.
Quick guide.

General Overview

1. VOLUME –
2. VOLUME +
3. MODE
4. PLAY/PAUSE& ON/OFF
5. CONTROL TALK
6. PREVIOUS
7. NEXT
8. MICROPHONE
9. POWER ON INDICATOR
10.AUDIO OUTPUT CONNECTION
11. CHARGE LED INDICATOR
12. USB CONNECTION FOR BATTERY CHARGE
13. MODE LED INDICATOR
14. AUDIO INPUT CONNECTION

Main Functions

Turn on / off your device

Use the ON/OFF button (4) to turn on and turn off your device.

To turn on your device, press and keep 2 seconds the ON/OFF button (4). The POWER INDICATOR (9) will turn on with the heart icon, meaning that the device is now turned on.

To turn off your device, press and keep 2 seconds the ON/OFF button (4).

Changing play mode

When you turn the device, pairing mode will start automatically. To change into “Audio-In” mode, you only need to connect audio cable (included) to the AUDIO INPUT CONEXION (14).

Charging the battery

When the speaker stop emit sound or not turn on, is the time to charge it. Connect the microUSB end of the included USB cable to your Music Box B3 Bluetooth (12) and the other end to any USB port that can provide energy (PC, USB wall charger, car, etc). The LED INDICATOR (13) will turn on in red color and when the charge is completed the LED will turn off.

Note: It is recommended to turn off the device when charging. Do not store or leave unused for a long period of time with the battery completely discharged.

Bluetooth Pairing

Everytime you turn on your Music Box B3 Bluetooth, pairing mode will start automatically; at the same time, the search and pairing process will start on your Bluetooth® device (smartphone, tablet, laptop, etc). Once you have identified the Music Box B3 Bluetooth on your device, select “Connect” and both devices will pair each other immediately with no need of pairing codes; the speaker will play a sound indicating that the connection has been established.

To pair the speaker with the last device again, you only need to turn on the Music Box B3 Bluetooth and the synchronization will start automatically.

If you want to pair another Bluetooth® device, keep the CONTROL TALK button (5). The current pair will stop and the device will start another Bluetooth® synchronization.

Play Control

Once you have paired your Music Box B3 Bluetooth, you can control the volume from the speaker. In order to do that; press buttons “VOLUME – ” (1) or “VOLUME + ” (2).

To pause or resume the playback, press PLAY/PAUSE button (4) once.

To forward or backward one song, hold NEXT (7) or PREVIOUS (6) buttons.

Talk Control

Once you have paired your Music Box B3 Bluetooth with your mobile or smartphone, you can receive phone calls and use the built-in MICROPHONE (8) to talk from the speaker. To answer an incoming call, press the CONTROL TALK button (5) and when you finish, press the CONTROL TALK button (5) again to end the call. If you are listening to music when you receive a call, the music will be paused and when you end the call, the music will resume.

Connections Audio Input and Output.

Audio Input Connection.

It is also possible to enjoy your Music Box B3 Bluetooth without pairing it with any bluetooth device thanks to its AUDIO INPUT CONEXION (14) in which you can connect an audio cable with a 3.5mm jack connector and the other end to your player.

Your Music Box B3 Bluetooth must be turned on in order to use this function.

NOTE: While using the device in Audio-In mode, it is not possible to control the playback neither the volume from the speaker. You have to do it from the player connected.

Audio Output Connection.

You can also use your Music Box B3 Bluetooth like Bluetooth receiver connecting it to the line input on your stereo or your TV through the AUDIO OUT CONNECTION (10) with the audio cable with 3.5mm jack included.

Warranty

Energy Sistem Soyntec SA is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 12 months.

This warranty covers any defects in workmanship or materials. This warranty does not cover any failure of the product due to accidents, misuse or alteration made by an unauthorized person.

The special 36-months warranty is valid for the European Union. For other countries, please refer to your specific legislation or your local distributor.

Warranty Procedure

1. Visit the Support section at http://support.energysistem.com and select your product to view the FAQ
(Frequently Asked Questions), user manuals, drivers and updates available, as the possibility to submit a query
to the Technical Service or consult the warranty. You can check the availability of the user manual in your
language at http://www.energysistem.com/en-en/support/manuals
2. Alternatively, you may prefer to contact the distributor from which you purchased the product, presenting the
purchase receipt or invoice.

Specifications are subject to change without notice.

Trademarks. All company, brand and product names are trademarks or registered trademarks of their respective
companies.

Declaration of Conformity

Manufacturer Name: Energy Sistem Soyntec S.A.
Address: Pol. Ind. Finestrat C/. Calpe, 1 – 03509 Finestrat Alicante (Spain).
Tel: + 34 966 830 324 // NIF: A53107488

We declare under our own exclusive responsibility that the product:

Music Box BZ3 Bluetooth

Manufacturing Country: China

Referred to in this declaration is in compliance with the essential norms and standards

EN 60065:2014(Eight Edition)
EN 62479:2010
EN 301 489-01 V2.1.1:2017-02
EN 301 489-3 V2.1.1:2017-03
EN 301 489-17 V3.1.1:2017-02
EN 300 328 V2.1.1:2016-11
EN 303 345 V1.1.7:2017-03

in conformity with the essential norms and standards of the Directive 2014/53/EU of the European Parliament and of the
Council of April 16th 2014.