ECO-FLYING H100 Foldable Electric Scooter Manual

ECO-FLYING H100 Foldable Electric Scooter Manual

01 Product Description

Product Structure

Tyre Installation

Folding

Handlebar Installation

Product Specification

Product Packing List

H100 includes the following please inspect and contact authorized dealers or post sales support department to replace any missing items.

02 Warning!

Please inspect before riding.

1. Handle bar (Check to make sure the handle bar screws are not loose).
2. Front and rear brake (Be sure brakes are fully engaging).
3. Fender (Does not interfere with the tire).
4. Battery (Check to make sure battery is charged).
5. Tire (Check tires for damage, ensure properly inflated).
6. Front and rear wheels (Securely fastened).
7. Motor (Operating ropery).

03 Safety Precautions!

1. Always ride with a helmet and protective gear.
2. Do not ride with more than one person at any time.
3. Do not immerse scooter in water.
4. Always ride with two hands.
5. Do not ride up or down stairs.
6. Use both front and rear brakes when stopping.
7. Do not ride the scooter at night.
8. Wear proper footwear.
9. Do not use mobile phones while riding.
10. Be aware of your surroundings when riding the scooter.
11. Do not ride when you are not feeling well such as drunk or taking medicinal.

05 Maintenance!

Your Electric Scooter should be regularly maintained.

1. Operating System: Some parts need to be lubricated.
   • Brake rod (front rear)
   • Wire movement part brake material: refined steel
   • Wire loop section
   • Movable parts of accelerator
2. Brake: Check your brake pads often for wear and tear. If you find rust wear, or it is unusable, brake is recommended to be replaced.
3. Shaft: Lubricate properly to wheel move smoothly. the front wheel, gear crank and rear
4. Wire: Ensure your wiring cables are free of dust and moisture. Clean or lubricate as needed.
5. Tires
   • Do not over-inflate. Stay within recommended PSI which can be located on the sidewall of your tire.
   • Do not lubricate the tires and rims.
   • After using the tire for a long time, please replace the tire, which will prolong the use of the bicycle.

06 After Sale Service!

Assembly
The Electric Scooter is roughly 85% assembled, but does require some assembly. For safe , please check and test everything before riding . After inspection and adjustment f there any , please contact your authorized dealer.

Damage and Scratches
To avoid damage, scooters are packed with foam and cardboard. If some parts broken, please take some photos and contact your authorized dealer for more information and assistance.
Summer is a season that makes it easy to puncture tires. Please be careful. It is necessary to check the tires before putting the air in the tire.

It is necessary to check the tires before putting the air in the tire.

• Check the amount of air in your tire.
• Due to higher temperatures, there may be thermal expansion. Inspect PSI to ensure you’re within proper guidelines.
• Please check whether the tip gap is removed.

About Configurations
Due to mass production and different batches, please understand that the item may not be the same as the
pictures in the brochure, but we guarantee that the changed parts will be updated.

07 Safety Recommendations

1. For your safety and the safety of others, you must follow the instructions outlined in this manual.
2. Risk of injury, due to improper operation of the unit may occur. On smooth surfaces, emergency braking may cause skidding and loss of balance.
3. While riding maintain an appropriate distance from pedestrians and reduce speeds while passing them.
4. Always follow local driving laws. Violation of the above rules may result in personal injury. We are not responsible for any injuries.
5. Inspect your scooter carefully before each use. If you find broken parts, decreased battery life, air leaking from tires excessive wear, abnormal noises when riding, please discontinue use of the scooter immediately and contact your authorized dealer.

08 Daily Maintenance and storage

Clean and Store Electric Scooter
If you find any stains on electric scooter housing, use a soft, damp cloth to wipe the vehicle.

Warning: Do not use alcohol, gasoline, kerosene or other corrosive solutions, volatile chemical solvents to clean the scooter. It will cause serious damage to the scooter body. Do not wash electric scooter with high pressure. Make sure the scooter is off before washing and the plug cover is in the charging port otherwise you may get an electric shock or cause serious damage.

When you are not using the scooter, store it in a cool, dry place. Leaving the device in sun or in extremely high or low temperatures can cause a reduced battery life.

Maintenance of Electric Scooter Battery .

1. Do not use batteries from other brands.
2. Do not open or disassemble the battery to prevent electric shock. Avoid contact with metal objects to prevent a short circuit. The battery may malfunction or can cause jury.
3. Use the supplied AC adapter to prevent malfunction and reduce the risk of overheating.
4. Only dispose of batteries in accordance with local laws.
5. Charge the battery after each use to prolong battery life.