dahua NVR5216-16P-1 NVR System User Guide
System Version: V4.000.10BE002.4
Build Date: 2020-09-10
NB: The firmware version is based on the latest version when this document was created and may slightly differ from future versions, however this will not affect any of the functionality
TiOC HOW TO GUIDE | How to set Alarm Output and Alarm Delay Time
Step 1: Here is Motion Detection as an example. Go to 
ALARM > ”Video Detection” > 
.
Step2: Choose the channel you want to apply the alarm to and click 
Enable to activate the function. Type the time for Anti-Dither and Post-Alarm to delay the alarm time.
Click 
at the bottom right corner to save all the changes.
Note: Anti-Dither means alarms during this time will only be reported once. Post-Alarm means how long the alarm will be reported for after the event has happened, which could be coordinated with the function of Anti-Dither.
*Design and specifications are subject to change without notice.
DAHUA UK & IRELAND
Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
Tel: +44 (0) 1628 613 500
sales.UK@dahuatech.com
support.UK@dahuatech.com
If you still encounter problems operating your Dahua device, please call +44 (0)1628 613 500