PRODUCT FEATURES:
– Replaces factory license plate light assembly.
– With built-in white LED light to match the factory installed light.
– Selectable Parking Guide Line ON or OFF.
– Maintains the OEM look.
PARTS INCLUDED:
- License Plate Light camera
- 20” extension cable
INSTALLATION INSTRUCTIONS:
- Carefully remove the factory license plate light.
- Tap the RED (+12V) and BLACK (ground) wires of the CVW-07L to the factory license plate light wiring.
- Run the camera cable to the inside of the cabin towards the radio.
- Make the power and video connections to the rear view camera integration interface or the aftermarket radio.
- Test the camera and LED light for functionality.
- Install the new license plate light camera.
*NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire using RED Wire A. DO NOT connect both wires to +12V at the same time. Insulate the red wire that is not
being used. Tap the Black wire to an existing ground lead, or ground Black wire securely to vehicle body metal.
VEHICLE APPLICATIONS:
VOLKSWAGEN
2008 – 2015 Beetle
