PRODUCT FEATURES:
– Installs at the factory backup camera knockout. No need to drill a hole.
– Selectable Parking Guide Line ON or OFF.
– Maintains the OEM look.
PARTS INCLUDED:
- Snap-in camera
- 20” extension cable
INSTALLATION INSTRUCTIONS:
- Remove the factory camera knockout.
- Run the camera cable through the knockout hole and run it to the inside of the cabin towards the radio.
- Make the power and video connections to the RVC interface or the aftermarket radio.
- Test the camera for functionality before installing the new camera.
*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to insulate RED Wire A to avoid it from shorting. If you will be tapping power from the reverse light +12V, insulate RED
Wire B to avoid it from shorting. With either connection the Black GROUND wire needs to be connected to a solid chassis ground. For vehicles with manual transmission, we recommend tapping +12V power from the reverse light.
WHITE Wire: Connect to show parking guide line. Disconnect to remove. Insulate with tape to avoid from shorting.
Note: Cycle the camera power after connecting or disconnecting the control wire.
VEHICLE APPLICATIONS:
MERCEDES BENZ
2007 – 2013 CL Class
2010 – 2013 S Class