PRODUCT FEATURES:
– Mounts behind the license plate for a clean look.
– Selectable Parking Guide Line ON or OFF.
PARTS INCLUDED:
INSTALLATION DIAGRAM:
*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to insulate RED Wire A to avoid it from shorting. If you will be tapping power from the reverse light +12V, insulate RED
Wire B to avoid it from shorting. With either connection the Black GROUND wire needs to be connected to a solid chassis ground. For vehicles with manual transmission, we recommend tapping +12V power from the reverse light.
WHITE Wire Loop: Cut to remove parking guide lines. Connect to show parking guide lines. Insulate with tape to avoid from shorting.
NOTE: Cycle the camera power by unplugging the 4 pin barrel connectors after connecting or disconnecting the control wires.
