PRODUCT FEATURES:
– Replaces factory trunk handle.
– Selectable Parking Guide Line ON or OFF.
– Maintains the OEM look.
PARTS INCLUDED:
- Trunk handle camera
- 20” extension cable
INSTALLATION INSTRUCTIONS:
- Carefully remove the factory trunk handle using a plastic panel removal tool.
- Run the camera cable to the inside of the cabin towards the radio.
- Make the power and video connections to the RVC interface or the aftermarket radio.
- Test the camera for functionality.
- Snap in the new trunk handle.
*NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire using RED Wire A. DO NOT connect both wires to +12V at the same time. Insulate the red wire that is not being used. Tap the Black wire to an existing ground lead, or ground Black wire securely to vehicle body metal.
VEHICLE APPLICATIONS:
2012-2018 4 Series
2012-2014 7 Series
2016-2017 X1
2014-2017 X3
2014-2018 X5
2015-2017 X6