Manual

PRODUCT FEATURES: – Replaces factory license plate light assembly. – Selectable Parking Guide Line ON or OFF. – Maintains the OEM look. PARTS INCLUDED: License Plate Light camera 20” extension cable INSTALLATION INSTRUCTIONS: Carefully remove the factory license plate light. Run the camera cable to the inside of the cabin towards the radio. Connect the … Read more

*NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to insulate RED Wire A to avoid it from shorting. If you will be tapping power from the reverse light +12V, insulate RED Wire B to avoid it from shorting. With either connection … Read more

PRODUCT FEATURES: – Adjustable for a perfect viewing angle. – Push-in style mounting. – Selectable parking guide line ON or OFF. – For Rear or Front camera use. PARTS INCLUDED: MOUNTING OPTIONS: INSTALLATION DIAGRAM: *NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse … Read more

PRODUCT FEATURES: – Selectable Parking Guide Line ON or OFF. – Gold plated mounting bolt. – Small footprint for a wide variety of lip mount installation locations. PARTS INCLUDED: MOUNTING OPTIONS: INSTALLATION DIAGRAM: *NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light … Read more

PRODUCT FEATURES: – Universal Lip mount with screws. – Selectable Parking Guide Line ON or OFF. – Can be used as a Rear View or Front View camera. PARTS INCLUDED: INSTALLATION DIAGRAM: *NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire … Read more

PRODUCT FEATURES: – Universal lip mount with screws. – Selectable Parking Guide Line ON or OFF. – Can be used as a Rear View or Front View camera. PARTS INCLUDED: INSTALLATION DIAGRAM: *NOTE: To power the camera, use RED Wire A or B. If tapping power from the radio or RVC Interface, make sure to … Read more

PRODUCT FEATURES: – With Selectable Parking Guide Lines ON / OFF. – Push-in style mounting. PARTS INCLUDED: INSTALLATION DIAGRAM: *NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire using RED Wire A. DO NOT connect both wires to +12V at the … Read more

PRODUCT FEATURES: – With Moving Parking Guide Lines. – Butterfly mount for a wide variety of mounting installation locations. PARTS INCLUDED: INSTALLATION DIAGRAM: *NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire using RED Wire A. DO NOT connect both wires … Read more

PRODUCT SPECIFICATIONS: Sensor: Super CMOS Pixels: 640H x 480V (NTSC) Resolution: 480 TVL (horizonal) Viewing Angle: 130° Illumination – .04Lux (18 IR LEDs) Connection: G16 Aviation 4pin connectors Power Supply: 12V to 24V Operating Temperature: -10° – +60° Waterproof: IP68 Rated PARTS INCLUDED: INSTALLATION DIAGRAM:

PRODUCT FEATURES: – Replaces the factory third brake light to maintains the OEM look. – LED brake lights included. – 6 Infra Red LEDs for night time use. – With built-in microphone. – Uses 4-pin aviation type water resistant connectors PARTS INCLUDED: INSTALLATION INSTRUCTIONS: Remove the factory third brake light. Plug the 4-pin aviation connector … Read more