BORMANN BWR5113 Foldable Car Creeper User Manual
Safety instructions
Warning!
Read, study and follow all instructions before assembling or operating this device. Failure to heed these instructions may result in personal injury and or properly damage. Do not exceed maximum capacity of 135 kilograms. Do not stand on the creeper. This creeper is designed for use on hard, level surface capable of sustaining the load. Use on other than hard, level surface could result in load instability and possible loss of load resulting in properly damage and personal injury. Alterations shall not be made to this product. If creeper is not operating properly, or parts are loose, missing, or broken. Stop use of creeper immediately. Creeper’s fabric will burn. Be care when near open flame or with burning cigarettes.
Assembly instructions
Connect these three sections of foam padded creeper together by 4*M8x55mm hex head bolts and M8 lock nuts. Tighten the M8 hex head bolts and nuts firmly.
Install 6*swivel casters into the frame of assembled creeper body.
How to convert the creeper to mechanics seat:
- Locate and unlock the Locking pin by pulling it out until the locking mechanism (locking hole) has been disengaged. Flip the middle part of creeper towards the end until the locking pin can engage the mechanics seat locking latch.
- Flip the front part of creeper (head frame) to the other side until it has sit horizontally.
- Reverse the above steps to convert the mechanics seat to creeper.
Description of main parts
- Padded headrest
- Nuts (*4)
- Washers (*4)
- Wheels (*4)
- Rear frame
- Locking pin
- Middle frame
- Head frame
- Locking latch
- Locking hole
Technical Data
Weight Capacity:150Kgs
Product Length:930Mm
Product Width:420Mm
Product Height:100Mm
Square Tube: 25*25Mm Steel
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
DISPOSE OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE