ANTOP AT-250X2 2 Pack Versa Indoor Smartpass Amplified HDTV Folding Antenna User Guide
Package Contents of the AT-250X2
INSTRUCTIONS
Installation Instruction Manual
Your VERSA Smartpass Amplified HDTV Antenna / AT-250X2 is perfect for indoor use. Antop’s new generation digital technology allows you the flexibility to set up your antenna in various locations and still receive great digital reception.
Antop’s New Generation Digital Technology
- Smartpass Amplifier: all-in-one design allows easier connection, and delivers correct balance between short-and long-range
- 5G LTE Cellular Filter: blocks 3G/4G/5G signals for noise-free TV
Following are instructions for indoor installation. Read through all instructions prior to beginning installation procedure.
Note: Although this antenna is great for indoor use, a higher mounting location positioned towards the broadcast tower may result in better reception. Install the antenna as high as possible, and preferably with a clear path between the antenna and the TV station transmitters. Trees, buildings, mountais, etc. can all impact the performance of any antenna.
Installation
1.1 Tabletop Placement
Test the antenna in multiple locations to find the one with best reception quality and place the antenna there. A high location or positioning the antenna facing toward the broadcast tower may result in better reception. Attach the clip to the antenna, rotate the clip and use it as a stand to support the antenna for tabletop placement.
1.2 Mount on a TV
Use the clip to clamp the antenna to a TV. Adjust the antenna for the best reception.
Connecting
2.1 Connect the coaxial cable attached to the antenna to the ANTENNA/CABLE IN connector on the back of the TV or converter Connect the USB cable between the DC socket in the Smartpass Amplifier and an open USB port with DC 5V output on the back of the TV. If the TV does not have a USB port with DC 5V output, use the included power adapter to power the Smartpass Amplifier via wall outlet.
The Smartpass Amplifier must be powered on, in order to function
Push the Switch On or Off and select the setting with which more channels are received.
- Switch Off The LED indicates yellow for normal amplification.
- Switch On – The LED indicates green for stronger amplification.
Scan channels after each setting change to the Smatpass Amplifier
2.2 For reception to two TVs, connect one antenna to each Note: Each TV will have to be scanned for channels.
Setting and Scanning
In the TV’s setup menu, set the input to “Antenna” or “Air”, then, set TV to “Scan” for channels. Consult the TV manual for detailed instructions.
IMPORTANT NOTE!
If you need to return this item for any reason, you must return all items that shipped in the package.
WARRANTY POLICY
Customers should first contact their place of purchase to determine the reseller’s warranty policy. Antop Antenna’s warranty will take effect after the expiration of reseller’s policy. Antop Antenna, warrants its products for a period of one (I) year from the original date of purchase. Warranty is valid only with proof of purchase. Warranty does not apply to defects or failures of the product caused by: neglect, misuse, negligence, accident, abuse, mishandling, misapplication, alteration, modification, power outage, unauthorized/unreasonable use, or any uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to determine the reseller’s return policy. If purchased directly from Antop Antenna or before returning directly to Antop Antenna, a Return Material Authorization (RMA) number must be obtained in advance by contacting Antop Antenna customer service via e-mail or telephone. Merchandise returned to Antop Antenna must have an RNA number displayed on the box and a copy of your proof of purchase inside the package. Absolutely no refund after 30 days of purchase from Antop Antenna. A restocking fee of 15% may be deducted from any refund, ask representative for further details. Refund policy for US & Canada customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of purchase to determine the reseller’s policies. No upgrades or exchanges for different models or SKU’s. One (1)
Year imited manufacturer’s warranty for exchange of product due to malfunction, failure or defect, missing parts or components. Exchanges will be for the same item, model and/or SKU, within one (1) year of original purchase date. A Return Material Authorization (RMA) number must be issued by Antop Antenna prior to returning any product or part. To obtain an RMA, contact Antop Antenna via email or telephone.
SHIPPING & COSTS
Customer will be responsible for shipping costs of merchandise sent to Antop Antenna. Please consult a customer service representative for details. When shipping any item to Antop Antenna, please consider using a trackable shipping method. Antop Antenna cannot be held responsible for lost or misdirected shipments. Exchanged and returned products must be sent to: Antop Antenna, RMA Department, 1650 S. Balboa Ave, Ontario, California 91761. To receive a Return Material Authorization from Antop Antenna please send your request to RMA Dept: Support@antopusa.com or to speak to Customer Service: via telephone, M-F, 9am to Spm (PST) 909- 947-8883.
ANTOP ANTENNA INC I Tel. 909.947.8883 I Email: Support@antopusa com