PRODUCT FEATURES:
– Replaces factory trunk handle.
– With built-in trunk release switch.
– Maintains the OEM look.
PARTS INCLUDED:
- Trunk handle camera
- 20” extension cable
INSTALLATION INSTRUCTIONS:
- Carefully remove the factory trunk handle using a plastic panel removal tool.
- Unplug the trunk release connector.
- Run the cable to the inside of the cabin towards the radio.
- Make the power and video connections to the RVC interface or the aftermarket radio.
- Plug the factory trunk release switch to the new trunk handle camera.
- Test the camera for functionality and snap in the new trunk handle.
*NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light wire using RED Wire A. DO NOT connect both wires to +12V at the same time. Insulate the red wire that is not being used. Tap the Black wire to an existing ground lead, or ground Black wire securely to vehicle body metal.
VEHICLE APPLICATIONS:
2004-2012 1 Series
2005-2013 3 Series
2004-2010 5 Series
2010-2016 X1
2007-2013 X5
2008-2014 X6
