PRODUCT FEATURES:
– Uses a 1/3” Sony CCD sensor.
– Replaces the factory third brake light to maintains the OEM look.
– LED brake lights included.
– 6 Infra Red LEDs for night time use.
– With Built-in Microphone.
– Uses 4-pin aviation type water resistant connectors.
PARTS INCLUDED:
- Third Brake Light camera
- 33’ extension cable
- 4-pin aviation connector to RCA adapter
- Mounting screws
- Male to Male RCA adapter
INSTALLATION INSTRUCTIONS:
- Remove the factory third brake light.
- Tap power and ground from the factory brake light harness to the red and black wires from the camera.
- Run the extension cable provided towards the radio.
- Plug the 4-pin aviation connector of the extension cable to the camera cable.
- Make the power and video connections at the radio.
- Test the camera prior to reinstalling in the third brake light location.
SPECIFICATIONS:
Sensor: 1/3” SONY CCD sensor.
Pixels: 975H x 582V (NTSC)
Resolution: 600TVL (horizonal)
Viewing Angle: 150°
Illumination: .01Lux (18 IR LEDs)
Connection: G16 Aviation 4pin connectors
VEHICLE APPLICATIONS:
2012 – 2018 NV 1500, 2500 & 3500