800 Series Built-in Coffee Machine BCM8450UC Stainless Steel User Manual

How to use these instructions
You can open up the front cover of this instruction manual. There you will find
illustrations of the appliance with each part numbered. These numbers will be referred to throughout the text.
Example: brewing unit (15)
These instructions also show display texts and symbols in a special way. This enable you to clearly see where we refer to texts or symbols that are marked or displayed on the appliance.
Display indicators: “Espresso”
Buttons and controls on the display:
The appliance comes with a quick reference guide where you can find the most
important functions at a glance. It can be stored in the accessory drawer of the appliance.
Pay special attention to the important safety instructions in the “Important Safety Precautions” section.
Safety Definitions
NOTICE:
This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.
Note:
This alerts you to important information and/or tips.

IMPORTANT SAFETY PRECAUTIONS READ AND SAVE THESE INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Please read and follow the operating instructions carefully and keep them for later reference. If the unit is transferred to another party, please be sure to include these instructions.
Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.
Do not touch hot surfaces. Use handles or knobs.
Be sure that all components are assembled and fastened properly.
To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body in water or in any other liquid. See Use and Care Guide for cleaning.
Close supervision is necessary when the appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after it malfunctions, or has been damaged in any manner. Return appliance to the nearest authorised service facility.
The use of accessories attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
Do not use outdoors or in a damp area.
Do not let cord hang over edge of table or counter top, or touch hot surfaces.
Do not place unit or components on or near a cooktop or range, or in a heated oven.
Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn control to “off”, then remove plug from wall outlet.
This appliance must not be used by children without adult supervision or by disabled persons without assistance.
Do not use appliance for anything other than its intended use.
Save these instructions.
Please note the special information on cleaning in the instructions.

To reduce risk of fire and electric shock:
Installation
Connect and operate the appliance only according to the rating plate specifications. Use appliance only with transformer which is identified as Type 8001010566. Do not connect the appliance to or operate it by means of a time switch or remote control socket. The unit must not be operated with an extension cord. Use the Coffeemaker only if power cord and appliance show no signs of damage. Should a problem occur, pull the plug and disconnect from the power immediately. Never immerse the appliance or power cable in water or any liquid. Avoid spillage on the connector.
Grounding
This appliance may only be connected to a power supply with 120 Volt AC via a correctly installed receptacle with ground.
Repairs
To avoid potential hazards, repairs must only be carried out by authorised service
personnel. If the power cord of this appliance is damaged, it must be replaced by a original replacement power cord, which can be purchased from our Customer Service Department.
To avoid the risk of scalding:
Please note that the beverages are very hot when dispensed.
Do not use chemically softened water!
Risk of scalding (Home Connect)!
If an unattended remote start takes place, third parties may be scalded if they reach under the coffee dispenser during drinks dispensing. You should therefore make sure that with an unattended remote start that there is no risk to other people, in particular not to children, or to property.
To avoid the risk of suffocation:
Do not allow children to play with packaging material. Store small parts safely as they can be a choke hazard.
To avoid the risk of injury:
Keep descaling tablets out of the reach of children. Keep children away from the
appliance and power cable. Do not reach into the grinding unit. Be careful not to pinch your fingers when closing the door. A misuse of the appliance can potentially lead to injury.
To avoid the risk of burns:
The beverage outlet gets very hot. After use, allow to cool down first before touching. After use, the heating element surfaces and warming plate can retain heat. Wait until cool before touching. Freshly prepared beverages are very hot. Leave to cool a little as necessary.
To avoid the risk of influence electronic implants:
The appliance contains permanent magnets that may influence electronic implants such as pacemakers or insulin pumps. Persons wearing electronic
implants must maintain a minimum distance of 4″ (10 cm) from the front of the appliance and from the following parts upon removal: milk container, milk system, water tank and brewing unit.

Included in delivery

(Figure A)
a Fully automatic coffee machine
b Instruction manual
c Quick reference guide
d Home Connect leaflet
e Measuring spoon
f Water hardness testing strip
g Milk tube (set)
h Milk container
i Suction pipe

Congratulations …
… on purchasing this fully automatic coffee machine! You have now acquired a high quality and modern kitchen appliance. It combines innovative technology with a range of functions and is easy to use. It will enable you to prepare a variety of delicious hot drinks quickly and simply – whether you’re in the mood for an invigorating espresso, a creamy cappuccino, a smooth latte machination or white coffee, or a traditional cup of coffee. At the same time the appliance offers you a wide range of options for adapting it to your individual taste. To ensure that you can use this fully automatic coffee machine with all its functions and features reliably and safely, we recommend you familiarise yourself with its components, functions, displays and controls. These instructions are designed to help you. So please take the time to read them before you switch on the appliance.

Overview

(Figures B to E)

Appliance door
a) Recessed grip (for opening the door)
b) Drip tray
Control panel (see next page)
a) Control ring
b) Information display
c) Touch display (left and right)
Outlet system (coffee, milk, hot water), height-adjustable
a) Cover
Milk system
a) Snap lever
b) Beverage outlet (upper part, lower part)
c) Milk tube (2 pieces)
d) Connecting element, metal (for magnet holder)
Power switch J (power supply)
Accessory drawer (for quick reference guide and accessories)
a) Quick reference guide
b) Measuring spoon
c) Water hardness strip
d) Milk tube (set)
Removable water tank
a) Lid for water tank
Removable bean container
a) Lid for bean container
Slide regulator for grinding degree setting
Magnet holder (for connecting element)
Removable drawer (for ground coffee/cleaning tablet)
Holder (for milk tube)
Protective cover (for brewing unit)
Brewing unit
a) Locking mechanism
b) Cover
Eject lever
Removable drip tray
a) Drip tray cover
b) Coffee grounds container
Collecting tray
Holder (for suction pipe)
a) Suction pipe
Rating plate (E number, FD)
Shelf with sensor (for milk container)
Milk container
a) Stainless steel container
b) Lower part of the lid
c) Upper part of the lid

Note:
Further information about the appliance, such as how to change the opening angle of the door, can be found in the Installation Instructions.

Controls

The appliance features user-friendly menu navigation to ensure that operation is as easy as possible while at the same time offering a wide range of functions. That means a range of options can be selected with just a few operating steps.
Power switch [Ο⁄Ι]
The power switch[Ο⁄Ι] (with the door open) is used to switch the appliance on, or
to switch it off fully (power supply off).
NOTICE:
Do not press the power switch while the appliance is in use. Switch off the appliance only when it is in energy saving mode, so that it can rinse automatically.
Control panel (touch field)
Note:
These operating instructions refer to several models. In some models [Φ] and
are touchscreen elements.
[Φ] Ion/off
Press [Φ] to switch on the appliance or put it into energy saving mode. The appliance is rinsed automatically.
The appliance does not rinse if:
● if it is still warm when switched on, or
● if no coffee was dispensed before it was switched off.
The appliance is ready for use as soon as the images for the drinks selection appear on the display.
start/stop
Press for either beverage preparation or to launch a service program.
Press again while the drink is being prepared to prematurely halt dispensing.
There are four menu fields in the control panel which can be activated by pressing.
The active menu field lights up red.
[ Coffee menu ]
[Coffee menu] lights up as soon as the appliance is in operation. Drinks can be selected and dispensed or settings for the drinks can be changed.
MyCoffee
Press to open the selection of “Personalised beverage preparation”. Personal settings for coffee drinks can be saved and called up (see the section “Personalised drinks”).
Menu
Press to call up the menu. Settings can be made and information called up (see the section “Menu”).
Service
Press to open the selection of service programs. Run the desired program as
described in the section “Service programs”.
Note:
Press , or again to exit the respective menu.
Control ring
Turn the control ring to navigate in the display or to change parameters.
Information display
The round display shows the drink selected, the settings or information.
Touch display (left and right)
Depending on the setting, different fields are shown in both the touch displays. A field is activated when pressed either to enter settings or change values.

Initial use

General
Fill the appropriate container using only pure, cold, carbonated water and only roasted beans. Do not use coffee beans that have been glazed, caramelised or
treated with other additives containing sugar, since they will block the brewing unit.

Setting up the appliance
● Remove any protective plastic film.
NOTICE:
Only use the appliance in a frost-free room. If it has been transported or stored
at temperatures below 32°F, wait at least 3 hours before initial use.
● Take hold of the appliance door by the recessed grip and open.
● Remove the water tank, rinse it and fill it with fresh water up to the “max” mark.
● Replace the water tank and click into place.
● Remove the bean container, fill with coffee beans and replace.
● Set the power switch to I and close the appliance door.
The appliance heats up and is rinsed.
The control panel is activated.
“Language” appears.
● Turn the control ring with your finger to select the desired language and press the [ Water hardness ] field.
Note:
It is important to set the water hardness correctly to enable the appliance to accurately indicate when the descaling program should be run. The preset water hardness is level 4. If a water softener is installed in the house, please set the water hardness to level 3. You can also check the water hardness by asking your local water supplier.
● Use the enclosed test strip to determine the water hardness. Briefly dip the test strip in water and check the result after one minute.
● Turn the control ring with your finger to set the water hardness determined.
● Press [ Set-up complete ]. The settings are saved.

The appliance is ready to use as soon as the drink images are shown and the
m lights up.
The integrated fan switches on each time a drink is dispensed and switches off again after a few minutes.
Note:
When the appliance is used for the first time after running a service program, or if it has not been operated for a long period, the first beverage will not have the full aroma.
When the fully automatic coffee machine is first used, a suitable thick and stable
“crema” is only achieved after the first few cups have been dispensed.
Switch off appliance
● Press [Φ].
The appliance rinses and switches to energy saving mode.
Exception: If only hot water is dispensed, the appliance switches off without rinsing.
● To switch the appliance off completely, open the appliance door and set the
power switch to [Ο].
NOTICE:
Do not press the power switch while the appliance is in use.
Note:
The factory settings of the fully automatic coffee machine are programmed for optimal performance. The appliance switches automatically to the energy saving mode after a specified time and rinses (duration can be set, see “Switch off after” in the section “Menu”).
Note:
The appliance is equipped with a sensor. If there is a milk container, this will be
correspondingly shown on the display when switching to the energy saving mode. If there is milk in the container, please store in the fridge.

Control panel

Information is shown on the display or settings can be entered by pressing the touchscreen and the control ring.
Display
The control panel shows the selected drinks, settings and setting options, as well as messages about the appliance’s operating status.
e.g. Drink selection
e.g. Information
Information disappears after operating the appliance or after a short time.
The information remains, however in the information display in the form of a small symbol.
Prompts to take action
Note:
If the action required was carried out, e.g. filling the water tank, the corresponding message and symbol will disappear.
Operation
Press texts or symbols combined with turning the control ring to navigate in the control panel (for an example, see section “Drink adjustment”).
An audible signal is heard when pressing the touch display. These audible signals
can be switched on or off (see the section “Menu – Key tones”).

Preparing drinks

This fully automatic coffee machine can be operated using coffee beans or ground coffee (but not instant coffee).
If using coffee beans, they will be freshly ground for each brewing. For optimum
quality, store the beans in a cool place in sealed containers.
Note:
Cups should be rewarmed, e.g. with hot water. This applies particularly to small
thick-walled espresso cups.
NOTICE:
Fill the water tank with fresh, carbonated, cold water every day. The tank should
always contain sufficient water for operating the appliance.
Note:
For some settings, coffee is prepared in two stages (see the section “Aroma Double Shot” and “Two cups at once”). Please wait until the process is completely finished.
Beverage selection
Turn the control ring to select different drinks:
The image and the name of the selected drink will appear in the middle of the information display.
The values currently set, e.g. for the coffee strength and temperature are shown on the left and right of the touch display.
The following drinks can be selected:
Ristretto
Espresso
Espresso Macchiato
Coffee
Cappuccino
Latte Macchiato
Café Latte
Milk froth
Warm milk
Hot water
The drink selected can be directly prepared with the pre-set values or first adjusted to individual taste.
Drink adjustment
Press one of the fields shown on the touch display, e.g. [Ø] to activate the field [Ø] turns red.
Turn the control ring to change the setting. Press [Ø] again to save the setting.
An example:
The values for a cup of Coffee can be changed as follows:
● Turn the control ring and select “Coffee”.
● Press the field, e.g. [Ø] to active, [Ø] lights up red.
• Turn the control ring and set the desired coffee strength in the middle of the information display , e.g. to “very strong”.
● Press the field [ο] .
● Turn the control ring to set the required amount of coffee, e.g. “5 oz”.
● Press the field [⇓].
● Turn the control ring and set the desired temperature, e.g.
● Save the settings by pressing the active field or by starting to dispense the drink.
Note:
There are different setting options depending on the type of drink. For coffee
drinks, for example, the strength, temperature and quantity can be set; for milk, only the volume.
The following settings are possible:
Coffee strength
mild
normal
strong
very strong
Double Shot
Double Shot +
Double Shot ++
Note:
Aroma Double Shot
The longer coffee is brewed, the more bitter substances and undesirable aromas
are released. This has a negative effect on the taste and makes the coffee less
easily digested. For extra strong coffee, the appliance has therefore a special
Aroma Double Shot function. When half the quantity has been prepared, it grinds and brews fresh coffee beans so that only the pleasant, aromatic scents are released.
Note:
When the 12 oz (360 ml) or 16 oz (480 ml) volume is selected, the Aroma Double Shot function is not aperable.
Note:
The Aroma Double Shot function is not available for Ristretto, Espresso Macchiato, and when ground coffee is used.
Volume
The volume differs depending on the type of drink and can be set in “oz” or “ml” increments. The factory setting is in “oz” and can be converted to “ml”, see chapter “Menu – Volume units”.
Note:
The volume dispensed can fluctuate depending on the quality of the milk.
Drinks temperature
Values for coffee drinks:
normal
high
very high
Values for hot water:
The factory setting is in “°F” and can be converted to “°C”, see chapter “Menu –
Temperature format”
Note:
If no controls are activated for approx. 30 seconds, the appliance will automatically exit the settings mode. The settings made will be automatically stored.
Two cups at once
Press to prepare two cups of the selected drink simultaneously. The setting is shown as text, e.g. “2 x Espresso”.
● Press .
● Place two cups left and right underneath the beverage outlet.
● Press to start dispensing.
The selected drink is prepared and then dispensed into both cups.
Note:
The drink is prepared in two stages (two grinding operations). Please wait until the process is completely finished, to remove the cup.
Note:
When the 12 oz (360 ml) or 16 oz (480 ml) volume is selected, it is not possible to dispense two cups at once.
Note:
Two cups at once cannot be dispensed for the settings “Aroma Double Shot” or “ground coffee”.

Preparation using coffee beans

The appliance must be ready for use.
● Place a cup underneath the beverage outlet.
● Turn the control ring and select “Ristretto”, “Espresso” or “Coffee”.
The display shows the selected drink along with the preset values for the drink.
Note:
The settings can be changed as described in the section “Drink adjustment”.
● Press to start dispensing.
The coffee is brewed and then dispensed into the cup.
Press again to prematurely halt dispensing.

Preparation using milk

This fully automatic coffee machine has an integrated beverage outlet. This can be used to prepare coffee drinks with milk or milk froth and warm milk.
Risk of burns!
The beverage outlet gets very hot. After use, always let it cool down before you touch it.
Milk container
This milk container has been specially designed to use together with this fully automatic coffee machine. It is solely intended for use in the household, and for storing milk in the refrigerator.
NOTICE:
Remove cups or glasses before opening the door to prevent them from falling.
Connecting the milk container or a milk carton:
● Open the appliance door.
● Remove the cover of the beverage outlet towards the front.
● Connect and fix the milk tubes and connecting elements as illustrated.
● Attach the cover firmly from the front on to the beverage outlet.
● Attach the suction pipe and insert into the milk container.
● Close the appliance door.
Note:
Dried milk residues are difficult to remove, therefore always clean immediately after use (see the section “Cleaning the milk system”).
Coffee drinks with milk
● Place a cup or glass underneath the beverage outlet.
● Turn the control ring and select “Espresso Macchiato”, “Cappuccino”, “Latte Macchiato” or “Café Latte”.
The display shows the selected drink along with the preset values for this drink.
Note:
The settings can be changed as described in the section “Drink adjustment”.
Press to start dispensing.
The milk is dispensed into the cup or glass first. Then the coffee is brewed and runs into the cup or glass.
Press again to stop the current step of the process prematurely.
Milk froth or warm milk
● Place a cup or glass underneath the beverage outlet.
● Turn the control ring and select “Milk froth” or “Warm milk”.
Note:
The settings can be changed as described in the section “Drink adjustment”.
● Press to start dispensing.
Milk froth or warm milk is dispensed from the beverage outlet.
Press again to prematurely halt the dispensing process.

Preparation using ground coffee

Note:
When using ground coffee, the setting for the strength of the coffee, dispensing two cups at once and dispensing larger volumes (12 oz/360 ml or 16 oz/480 ml)
is not operable. If the message “Double dispensing not possible with ground coffee” appears, please select a volume smaller than 12 oz/360 ml.
NOTICE:
Remove cups or glasses before opening the door to prevent them from falling.
The appliance must be ready for use.
● Open the appliance door.
● Remove the ground coffee drawer.
The removable drawer must be dry.
● Put in coffee grounds (maximum 2 level measuring spoons); do not press firmly.
NOTICE:
Do not use whole beans or instant coffee.
● Replace the ground coffee drawer.
● Close the appliance door.
Note:
If coffee is not dispensed within 90 seconds, the brewing chamber empties automatically to avoid an overflow. The appliance is then rinsed.
Place a cup underneath the beverage outlet.
● Turn the control ring and select a coffee drink or a coffee drink with milk.
The display shows the selected drink, a measuring spoon and the preset values for this drink.
Note:
The settings can be changed as described in the section “Drink adjustment”.
Note:
For coffee drinks with milk, please observe the instructions in the section “Preparation using milk”.
● Press to start dispensing.
The coffee is brewed and then dispensed into the cup. When selecting coffee drinks with milk, the milk is first dispensed and then the coffee brewed.
Note:
For another drink with ground coffee, repeat the procedure.

Dispensing hot water

The appliance must be ready for use.
● Remove the milk tube from the milk container.
● Remove any milk or coffee residue from the outlet.
● Place a cup or glass underneath the beverage outlet.
● Turn the control ring and select “Hot water”.
Note:
The settings can be changed as described in the section “Drink adjustment”.
● Press to start dispensing.
● The message appears “Milk hose separated from milk container and coffee outlet cleaned?”.
● If still connected, remove the milk tube and press [ Yes ] on the display.
Hot water flows out of the beverage outlet.
Press again to prematurely halt the dispensing process.

Personalized drinks

Press B to open the selection for personalised drinks.
Up to 8 storage spaces can be used. Save your favourite drinks that are frequently dispensed here with all their settings.
Note:
Press to exit the menu without saving at any time.
Entering or changing drinks
● Press .
The selection of memory locations appears.
● Turn the control ring to choose an empty memory location (empty glass) to make a new entry, change an occupied memory location, or delete a favourite drink.
● Select [ new ] at an empty memory location or [ Details ] at an occupied memory location.
The menu for adjusting the drinks opens.
The last drink dispensed is shown with the last settings selected.
● If you do not wish to save last drink dispensed, turn the control ring and select
another drink.
● Press each setting to be changed and turn the control ring to adjust the values
as desired.
Other setting options appear depending on the selection.
● Press [ Further details | Save ] to enter other settings.
Note:
For milk drinks, the mixing ratio of coffee and milk can be set.
● The settings can be stored under an individual name. Press [ Name ]. The screen for entering the name opens.
● Turn the control ring and select a letter or a symbol.
● Press [ Save letter ] to confirm the letter selected or [ Delete letter ] to delete it.
● Select other letters or symbols and confirm.
● With [ Save ] the entry is saved.
The selection menu opens.
● Press to exit the menu.
Deleting a drink
● Press
● Turn the control ring and select the occupied memory location.
● Press [ Details ] and [ Further details | Save ].
● Press [ Delete beverage ] and then [ Delete ].
The memory location is again free.
Select a personalised drink and dispense
Press . The selection of memory locations opens.
● Turn the control ring and select the desired memory location.
● Place a cup or glass underneath the beverage outlet.
● Press to start dispensing.

Adjusting the grind setting

This fully automatic coffee machine has an adjustable grinding unit. This enables the grinding level of the coffee to be individually changed.
● Open the appliance door.
● Slide the regulator to select the grinding degree setting between finely ground coffee and coarsely ground coffee.
● Close the appliance door.
Note:
For dark roast coffee beans, choose a finer grind, for lighter beans a coarser grind.
Note:
Make only small changes to the grinding degree setting.
Note:
The new setting will not become apparent until after the second cup of coffee.
Note:
If the display shows the message “Select a coarser degree of grinding”, this means that the beans are being ground too finely. Adjust the grinding level to a coarser setting.

Child-proof lock

The appliance can be locked to protect children against scalding and burns.
● Press and hold for at least 4 seconds. “Child-proof lock activated” briefly appears on the display.
No further operation is now possible; only can be pressed.
● To deactivate the child lock, press and hold A for at least 4 seconds.
“Child-proof lock deactivated” briefly appears on the display.

The menu is used for changing individual settings, accessing information and
launching processes.
● Press to open the menu.
The different setting options will appear in the touch display and the current setting in the round information display.
Navigating through the menu:
By pressing e.g. [ Language ] the corresponding setting option is activated and highlighted red.
Turn the control ring to enter the settings, e.g. “English”. By pressing [ Continue ], other setting options will appear.
For example:
Set the appliance at 15 minutes to switch off automatically:
● Press . The menu opens.
● Press [ Switch off after ], the field is highlighted red.
● Turn the control ring and select “00h15m”.
● Press . [ Save ] and [ Do not save ] appears.
● Press [ Save ]. The setting is saved.
The drink selection appears on the display.
Note:
Press to exit the menu at any time. If no entry is made within approx. 30 seconds, the menu closes automatically and the settings are not saved.
The following settings can be made:
Language
Set the desired language to show the display texts.
Water hardness
Set this to the local water hardness.
Level “1 (soft)” to “4 (very hard)” can be selected. The preset water hardness is “4 (very hard)”.
Note:
It is important to set the water hardness correctly to enable the appliance to accurately indicate when the descaling program should be run.
You can check the water hardness using the enclosed test strip or by asking your local water supplier. If a water softening system is installed in the house, please
select the “Softening device” setting.
Water filter
If a water filter is inserted, renewed or removed, the setting “Insert”, “Replace” or “Remove” must be made in the menu.
Note:
A water filter lowers limescale deposits, reduces impurities in water and improves
the coffee taste.
Water filters are available from retail outlets or from Customer Service (see the section “Accessories”).
Inserting or renewing a water filter:
A new water filter must be rinsed before it can be used.
● Turn the control ring to select either “Insert” or “Replace”.
● Press the water filter firmly into the opening of the water tank.
● Fill the water tank with cool water up to the “max” mark.
● Remove the milk tube from the milk container and close the door.
NOTICE:
Do not jam the tube when closing the door.
● Place a container with a capacity of 17 oz under the outlet .
● Press .
Water will now flow through the filter to rinse it.
The appliance is ready for use again.
Note:
Rinsing the filter simultaneously activates the setting for the change filter display.
The filter is no longer effective when the “Replace water filter” display appears, or at the latest after two months. It needs to be replaced for reasons of sanitation and to prevent a build-up of limescale (which could damage the appliance).
● If a new filter is not inserted, select the setting [ Remove ] and press .
The message “Remove filter, reinsert water tank, close door” appears.
Note:
If the appliance has not been used for a prolonged period (for example, while you are on vacation), the existing filter should be rinsed before the first time the appliance is used again. To do this, simply dispense a cup of hot water.
Detailed information about the water filter can be found in the manual supplied with the filter.
Temperature Format
Setting option in “°F” or “°C”.
Volume units
Setting option in “oz” or “ml”.
Switch off after
To set how long the appliance should wait after the last drink was prepared before it automatically rinses and switches itself off.
You can specify values from 15 minutes to 12 hours. The factory setting is 30 minutes.
Home Connect
Settings for connection to Wi-Fi network (home network) and mobile devices (see section “Home Connect”).
Illumination
Setting the illumination of the beverage outlet. “On”, “when in use” or “Off” can be selected.
Brightness illumination
Setting the illumination lightness of the beverage outlet. “Level 1” to “Level 10” can be selected.
Brightness display
Setting the illumination lightness of display.
Key tones
Switch the signal tones on or off.
Clock
Display option for time “Off”, “Analog” (on) or “Digital” (on). The setting for this can be changed in the Clock menu option.
Note:
If the appliance is switched off at the power switch or there is a power failure,
the settings for the time will be lost.
Time
Setting for the current time.
Clock format
Setting option in “12hr” (American mode) or “24hr” (European mode)
Note:
No difference between am and pm.
Frost protection
Service program to prevent frost damage during transportation and storage.
This program completely empties the appliance.
● Empty the water tank and reinsert.
● If available remove the milk container and close the door.
The appliance automatically empties all its pipes.
● Empty the drip tray and re-insert.
Beverage info
Display shows how many drinks have been prepared since its initial use.
Factory settings
Resets your own settings to the condition when delivered.
● Press [ Reset ] or [ Do not reset ] to either confirm or interrupt.

Home Connect

This fully automatic coffee machine is Wi-Fi-capable and can be remotely controlled using a mobile device (e.g. tablet PC, smartphone). The Home Connect App offers additional functions which are a perfect complement to the networked appliance.
If the appliance is not connected to a Wi-Fi network (home network), it can still function as a fully automatic coffee machine and be operated as usual via the display.
Important information:
The home network router must be operated in the 2.4 GHz frequency range. Please check it and adjust it if necessary.
The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country. You can find more information on this at www.home-connect.com.
Note:
Please ensure that you follow the safety instructions given at the beginning of this instruction manual and that these are also observed when operating the appliance via the Home Connect app and when away from home. Please also follow the instructions in the Home Connect App.
Note:
Operation of the appliance itself always takes priority, and during this time it is not possible to operate the appliance using the
Home Connect App.
Setting up
To implement settings via Home Connect, you must install the Home Connect App on a mobile device (e.g. tablet PC, smartphone). Please observe the supplied Home Connect documents with regard to this
feature.
Follow the steps specified by the app to implement the settings.
Login of the appliance in the Wi-Fi network can be carried out on initial set-up of the fully automatic coffee machine either directly or using the menu (first touch A to open the menu):
● Touch [ Home Connect ].
● Touch [ Wi-Fi ] to start the wireless
connection. “Wi-Fi Activated” appears in the display.
● Touch [ Connect network ]. The following selection appears:
[ Connect automatically ] and [ Manually connect ].
Note:
If the router has WPS functionality, please select [ Connect automatically ].
Connect automatically in the Wi-Fi network (home network)
● Touch [ Connect automatically ]. The display shows [ Network connection automatic ].
● Press the WPS button on the home network router within a few minutes and
wait until the display of the fully automatic coffee machine shows “Network connection successful”.
● Open the app on the mobile device.
● Touch [ Connect to app ]. The fully automatic coffee machine connects with the app.
● Wait until [ Connect with app successful ] lights up briefly in the display.
● Touch [ Remote start ]. A warning message appears.
● Touch [ Continue ] and read the warning message.
● Touch [ confirm ].
With the mobile device the functions of the fully automatic coffee machine can now be used to their full extent via the app.
Note:
If [Remote start ] – [ Deactivate ] is selected, only the modes of the fully automatic coffee machine are displayed in the Home Connect app. You can specify settings but not start drinks dispensing.
Connect manually in the Wi-Fi network (home network)
● Touch [ Manually connect ]. The fully automatic coffee machine sets up a separate Wi-Fi network which can be accessed with a tablet or smartphone. The display shows the SSID (the name) and the key (the password) of this network.
● Log the mobile device in to the network of the fully automatic coffee machine
with the “HomeConnect” SSID and the “HomeConnect” key.
● Start the app on the mobile device and follow the instructions for network login in the app and the supplied Home Connect documents.
The login process is complete when “Network connection successful” lights up briefly in the display of the fully automatic coffee machine.
● Touch [ Connect to app ]. The app must also be opened on the mobile device. The fully automatic coffee machine connects with the app.
● Wait until [ Connect with app successful ] lights up briefly in the display.
● Touch [ Remote start ]. A warning message appears.
● Touch [ Continue ] and read the warning message.
● Touch [ confirm ].
With the mobile device the functions of the fully automatic coffee machine can now be used to their full extent via the app.
Note:
If [Remote start ] – [ Deactivate ] is selected, only the modes of the fully automatic coffee machine are displayed in the Home Connect app. You can specify settings but not start dispense drinks.
Switching Wi-Fi on and off
Wi-Fi can be switched “Activated” or “Deactivated” as required (e.g. when on holiday).
Note:
Network information is retained after the appliance is switched off. After switching on, wait a few seconds until the fully automatic coffee machine has connected to the Wi-Fi network again. In networked standby mode the appliance requires a maximum of 2 W.
● Touch to open the menu.
● Touch [ Home Connect ].
● Touch [ Wi-Fi ] to switch the wireless module “Activated” and “Deactivated”.
Disconnecting
The fully automatic coffee machine can be disconnected from the Wi-Fi network at any time.
Note:
If the fully automatic coffee machine is disconnected from the Wi-Fi network, it cannot be operated using Home Connect.
● Touch to open the menu.
● Touch [ Home Connect ].
● Touch [ Disconnect from network ].
The connection to the network and app is disconnected. Wi-Fi and remote start are switched off.
Note:
Information about the Wi-Fi network is cleared.
Connecting with app
The Home Connect app can be installed on any number of mobile devices, which can then be used to connect to the fully automatic coffee machine.
The fully automatic coffee machine must already be connected to the Wi-Fi network.
● Open the app on the mobile device.
● Touch to open the menu.
● Touch [ Home Connect ].
● Touch [ Connect to app ] to connect to the appliance with the app.
Remote start
If you wish e.g. to start dispense drinks on the fully automatic coffee machine via
a mobile device, Remote start must be activated.
Note:
The [ Remote start ] text field is is only visible if connection with Home Connect has been successfully completed.
Note:
If Remote start is switched off, only the modes of the fully automatic coffee machine are displayed in the Home Connect app.
● Touch to open the menu.
● Touch [ Home Connect ].
● Touch [ Remote start ] to switch the function Remote start “Activated” and “Deactivated”.
Device Info
Display for network and device information
● Touch to open the menu.
● Touch [ Home Connect ].
● Touch [ Device info ]. The SSID, IP, MAC
address and serial number of the appliance are displayed for a few seconds.
Remote diagnostics
In the event of faults, Customer Service can use remote diagnostics to access your appliance. Contact Customer Service and ensure that your appliance is connected to the Home Connect server and check that the remote diagnostics service is available in your country.
For more information and to check whether the remote diagnostics service is available in your country, please visit the Help & Support area of the Home Connect website for your country: www.home-connect.com
Information on data protection
When the fully automatic coffee machine is connected for the first time to a Wi-Fi network which is connected to the Internet, the appliance transmits the following categories of data to the Home Connect server (initial registration):
● Unique appliance identification (consisting of appliance codes as well as the MAC address of the installed Wi-Fi communication module).
● Security certificate of the Wi-Fi communication module (to ensure a secure IT connection).
● The current software and hardware version of the fully automatic coffee machine.
● Status of any previous resetting to the factory settings.
This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time.
Note:
Please note that the Home Connect functions can only be used in conjunction with the Home Connect app. Information on data protection can be accessed in the Home Connect app.

Care and daily cleaning

● Wipe the outside of the appliance with a soft, damp cloth.
● Use a very mild cleaning agent.
● Clean the control panel using a microfiber cloth.
● Do not use any cleaning agents containing alcohol or spirits.
● Do not use abrasive cloths or cleaning agents.
● Always remove any limescale, residues of coffee or milk, cleaning or descaling solution immediately. It is possible for corrosion to form underneath such deposits.
Note:
New sponge cloths may contain salts. Salts can cause rust film on stainless steel and must therefore be washed out thoroughly before use.
● Open the door and pull the drip tray out forward.
● Remove drip tray cover and coffee grounds container.
● Empty, clean and dry individual parts.
NOTICE:
The drip tray and coffee grounds container should be emptied and cleaned every day in order to prevent deposits.
Remove the ground coffee drawer, clean under running water and dry well.
● Wipe and dry the inside of the appliance (support, drip tray and the ground coffee drawer) and collecting tray.
● Replace the dried parts, e.g. the ground coffee drawer.
NOTICE:
Do not put the following parts in the dishwasher:
Accessory drawer, water tank, lid of the water tank, beverage outlet cover, bean
container, lid of the bean container, metal connecting element, ground coffee drawer, protective cover of the brewing unit and the milk container.
The following parts may be cleaned in the dishwasher:
Drip plate, collecting tray, drip tray, drip tray cover, coffee grounds container, milk tubes, suction pipes, individual parts of the beverage outlet, measuring spoon and individual parts of the milk container lid.
Note:
If the appliance is cold when switched on, or if it is switched off after dispensing
coffee, it rinses automatically. The system is therefore self-cleaning.
NOTICE:
If the appliance is not used for a lengthy period (e.g. while you are on vacation), clean the entire appliance thoroughly, including the milk system, the ground coffee drawer and the brewing unit before use.
Cleaning the milk system
The milk system is automatically cleaned with a short jet of steam directly after
preparing a milk drink.
Note:
For particularly thorough cleaning, the milk system can be additionally rinsed with water (see the section “Rinsing the milk system”).
NOTICE:
Additionally clean the milk system manually every week and, if required, also more often (see the section “Cleaning the milk system manually”).
Rinsing the milk system
● Press E.
● Press [ Rinse milk system ] to select the program.
● Open door and remove suction pipe from the milk tube.
● Wipe the suction pipe and insert the end of the suction pipe into the hole on the coffee grounds container.
● Close the door. Be careful not to jam the milk tube.
● Place an empty glass underneath the beverage outlet.
● Press .
The milk system is rinsed with water.
● Then empty the glass.
● Press E to exit the program.
Cleaning the milk system manually
Take the milk system apart to clean it:
● Push the beverage outlet down completely and pull the cover forward to remove.
● Press the snap lever to the left of the beverage outlet downwards and pull the beverage outlet forward.
● Remove the milk tube. Dismantle the top and bottom sections of the beverage outlet.
● Separate the milk tubes, connecting element and suction pipe.
● Clean the individual parts with a detergent solution and a soft cloth.
● Rinse all parts with clean water and dry them.
● Put the individual parts back together again (see also the quick reference guide).
● Attach the beverage outlet directly from the front firmly to the three connections.
● Replace the cover.
Cleaning the milk container
For reasons of sanitation, the milk container should be cleaned regularly. Only the individual parts of the lid are suitable for being cleaned in the dishwasher. Clean the stainless steel milk container by hand with a mild detergent.
Cleaning the brewing unit
(see also the Quick reference guide)
In addition to the automatic cleaning program, the brewing unit should be removed regularly for cleaning.
● Open the appliance door.
● Use the power switch [Ο/I] to switch off the appliance completely.
● Remove the protective cover of the brewing unit.
● Remove the coffee grounds container.
● Slide the red latch on the brewing unit all the way to the left δ.
● Press the eject lever right down. The brewing unit will be released.
● Take hold of the brewing unit by the recessed grips and carefully remove it.
● Remove the cover of the brewing unit and clean thoroughly under running water.
● Clean the strainer of the brewing unit thoroughly under the water jet.
● Thoroughly clean the connecting nozzles of the brewing unit.
Important: Clean it without using washing-up liquid and do not put it in the dishwasher.
● Clean the inside of the appliance thoroughly with a moist cloth, removing any coffee residues.
● Leave the brewing unit and the inside of the appliance to dry.
● Place the cover back on the brewing unit.
● Push the brewing unit all the way into the appliance and press on the middle until it audibly clicks into place.
NOTICE:
The red latch must be right over at the left at δ before replacing (see figure E).
● Press the eject lever up and push the red latch over to the right to δ.
● Insert the coffee grounds container.
● Replace the protective cover.
● Close the appliance door.

Service programs

(see also the Quick reference guide)
The following messages will appear on the display at certain intervals, either “Cleaning program urgently required!” or “Descaling program urgently required!” or “Calc’nClean program urgently required!”.
The unit should immediately be cleaned or descaled using the appropriate program.
Alternatively, the two processes Descale and Clean can be carried out together using the Calc‘nClean function (see the section “Calc‘nClean”). Failure to carry out the service program according to the instructions may damage the appliance.
Note:
If the appliance is not descaled when it is supposed to be, the message “Descaling program is overdue. Device will shortly be locked.” will appear. Immediately perform the descaling process in accordance with the instructions. If the appliance is locked, it can only be operated again once the descaling process has been carried out.
To display how many beverages can still be prepared before one of the service programs needs to be run, proceed as follows:
● Press .
The service programs appear. The counter, e.g. “Descaling program necessary in
28 cups” provides information on when to perform the respective program next.
NOTICE:
For each of the service programs, use descaling and cleaning agents as described in the instructions and observe the (relevant) safety information. Never interrupt a service program. Never use vinegar, citric acid or any vinegar-based or citric acid-based agents. Never place descaling tablets or other descaling materials in the coffee drawer! Specially developed, suitable descaling and cleaning tablets are available from retail outlets or from Customer Service (see the section “Accessories”).
NOTICE:
Before starting each service program (Descale, Clean or Calc’nClean) remove the brewing unit, clean as instructed and replace it. Be careful not to jam the milk tube when closing the door.
After completion of each service program, wipe the appliance immediately with a soft, damp cloth to remove any residues from the descaling and cleaning solution. It is possible for corrosion to form underneath such deposits.
New sponge cloths may contain salts. Salts can cause rust film on stainless steel and must therefore be washed out thoroughly before use.
Clean the beverage outlet, milk tubes and connecting piece thoroughly.
Descaling
Takes about 21 minutes.
● Press .
● Press [ Descale ] to select the program.
● The display indicates the progress of the program.
● Empty drip trays and replace.
● Remove the water filter (if there is one) and press
● Pour lukewarm water into the empty water tank up to the “0.5 l” mark and then dissolve one Bosch descaling tablet 00311820 in it.
Note:
If there is not enough descaling solution in the water tank, you will be asked to do the following. Refill using carbonated water and press again.
● Remove the suction pipe from milk container, wipe it and insert the end of the
suction pipe into the hole on the coffee grounds container.
● Close the appliance door.
● Place a container with a capacity of 17oz under the beverage outlet.
● Press . The descaling program will now run for about 19 minutes.
● Remove the container and press .
● Rinse the water tank and (if removed) replace the water filter.
● Fill the tank with fresh water up to the “max” indicator.
● Replace the water tank and close the door.
● Place the container underneath the beverage outlet again.
● Press . The descaling program will now run for about 2 minutes and rinse the appliance.
● Remove the container, empty the drip trays, replace and close the appliance door.
● Press . The appliance has finished descaling and is ready for use again.
● Press E to exit the program.
Cleaning
Takes about 5 minutes.
● Press .
● Press [ Clean ] to select the program.
● The display indicates the progress of the program.
● Clean the beverage outlet and replace, empty the drip trays and replace.
● Open the ground coffee drawer, drop in a cleaning tablet and close the coffee drawer.
● Close the appliance door.
● Place a container with a capacity of 17oz under the beverage outlet.
● Press . The cleaning program will now run for about 5 minutes.
● Remove the container, empty the drip trays, replace and close the appliance door.
● Press . The appliance has finished cleaning and is ready for use again.
● Press to exit the program.
Calc‘nClean
Takes about 26 minutes.
Calc’nClean combines the functions Descale and Clean. If both programs are due to be carried out close together, the fully automatic coffee machine will automatically suggest this service program.
● Press .
● Press [ Calc’nClean ] to select the program.
● The display indicates the progress of the program.
● Clean the beverage outlet and replace, empty the drip trays and replace.
● Open the ground coffee drawer, drop in a cleaning tablet and close the coffee drawer again.
● Remove the water filter (if there is one) and press
● Pour lukewarm water into the empty water tank up to the “0.5 l” mark and then dissolve one Bosch descaling tablet 00311820 in it.
Note:
If there is not enough descaling solution in the water tank, you will be asked to do the following. Refill using carbonated water and press again.
● Remove the suction pipe from milk container, wipe it and insert the end of the
suction pipe into the hole on the coffee grounds container.
● Close the appliance door.
● Place a container with a capacity of 17oz under the beverage outlet.
● Press .
The program will now run for about 19 minutes.
● Remove the container and press .
● Rinse the water tank and (if removed) replace the water filter.
● Fill the tank with fresh water up to the “max” indicator.
● Replace the water tank and close the door.
● Place the container underneath the beverage outlet again.
● Press .
The program will now run for about 7 minutes and rinse the appliance.
● Remove the container, empty the drip trays, replace and close the appliance door.
● Press . The appliance is descaled, cleaned and ready for use again.
● Press to exit the program.
Special rinsing
NOTICE:
If any of the service programs are ever interrupted, for instance by a power failure, please proceed according to the information on the display:
● Rinse the water tank and refill it with fresh water up to the “max” mark.
● Press . The program will now run for about 2 minutes and rinse the appliance.
● Empty the drip trays, replace and close the appliance door. The appliance is ready for use again.
● Press to exit the program.

Tips on energy saving

● Press I to switch the appliance to “energy saving mode”. The appliance uses very little power when in “energy saving mode”, but monitors all safety relevant functions so as to avoid damage.
● In the menu under “Switch off after”, set the automatic switch off period to 15 minutes.
● Reduce the brightness of the display and the illumination in the menu to save energy.
● If possible, do not interrupt the dispensing of coffee or milk froth. Stopping a process prematurely results in higher energy consumption and the drip tray fills up more quickly.
● Descale the appliance regularly to avoid a build-up of limescale. Limescale residues cause higher energy consumption.

Frost protection

To prevent frost damage during transport and storage, completely empty the appliance beforehand (see the section “Menu – Frost protection”).

Storing accessories

The fully automatic coffee machine has a special accessory drawer for storing the
Quick reference guide and the accessories in the appliance.
● Put the measuring spoon and the water filter into the accessory drawer.
● Put the Quick Reference Guide into the special support at the front of the accessory drawer.
● The long suction pipe can be stored in the holder on the inside of the door (Figure D).
● The connecting element can be fixed to the magnetic holder above the ground coffee drawer.

Accessories

The following accessories are available from retailers or from customer service:

Disposal

Simple troubleshooting

The following table provides solutions for problems that may arise as you use your Bosch machine. If you do not find a solution for your specific problem or the problem persists after troubleshooting, please contact 1-800-944-2904.

Technical specifications

Warranty

STATEMENT OF LIMITED PRODUCT WARRANTY

What this Warranty Covers & Who it Applies to: The limited warranty provided by BSH Home Appliances (“Bosch”) in this Statement of Limited Product Warranty applies only to the Bosch appliance sold to you, the first using purchaser, provided that the Product was purchased: (1) for your normal, household (non-commercial) use, and has in fact at all times only been used for normal household purposes; (2) new at retail (not a display, “as is”, or previously returned model), and not for resale, or commercial use; and (3) within the United States or Canada, and has at all times remained within the country of original purchase. The warranties stated herein apply only to the first purchaser of the Product and are not transferable.

Please make sure to return your registration card; while not necessary to eff actuate warranty coverage, it is the best way for Bosch to notify you in the unlikely event of a safety notice or product recall.

How Long the Warranty Lasts: Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred sixty-five days (365) days from the date of purchase. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever. This Product is also warranted to be free from cosmetic defects in material and workmanship (such as scratches of stainless steel, paint/porcelain blemishes, chips, dents, or other damage to the finish) of the Product, for a period of thirty (30) days from the date of purchase or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent diff reverences in painted and porcelain parts, as well as diff reverences caused by kitchen lighting, product location, or other similar factors. This cosmetic warranty specifically excludes any display, floor, “As Is”, or “B” stock appliances.
Repair/Replace as Your Exclusive Remedy: During this warranty period, Bosch or one of its authorised service providers will repair your Product without charge to you (subject to certain limitations stated herein) if your Product proves to have been manufactured with a defect in materials or workmanship. If reasonable attempts to repair the Product have been made without success, then Bosch will replace your Product (upgraded models may be available to you, in Bosch’s sole discretion, for an additional charge). All removed parts and components shall become the property of Bosch at its sole option. All replaced and/or repaired parts shall assume the identity of the original part for purposes of this warranty and this warranty shall not be extended with respect to such parts. Bosch’s sole liability and responsibility hereunder is to repair manufacturer-defective Product only, using a Bosch-authorised service provider during normal business hours. For safety and property damage concerns, Bosch highly recommends that you do not attempt to repair the Product yourself, or use an un-authorised service; Bosch will have no responsibility or liability for repairs or work performed by a non-authorised service. If you choose to have someone other than an authorised service provider work on your Product, THIS WARRANTY WILL AUTOMATICALLY BECOME NULL AND VOID. Authorised service providers are those persons or companies that have been specially trained on Bosch products, and who possess, in Bosch ’s opinion, a superior reputation for customer service and technical ability (note that they are independent entities and are not agents, partners, affi liates or representatives of Bosch). Notwithstanding the foregoing, Bosch will not incur any liability, or have responsibility, for the Product if it is located in a remote area (more than 100 miles from an authorised service provider) or is reasonably inaccessible, hazardous, threatening, or treacherous locale, surroundings, or environment; in any such event, if you request, Bosch would still pay for labor and parts and ship the parts to the nearest authorised service provider, but you would still be fully liable and responsible for any travel time or other special charges by the service company, assuming they agree to make the service call.

Out of Warranty Product: Bosch is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, pro-rates, or Product replacement, once this warranty has expired.
Warranty Exclusions: The warranty coverage described herein excludes all defects or damage that are not the direct fault of Bosch, including without limitation, one or more of the following: (1) use of the Product in anything other than its normal, customary and intended manner (including without limitation, any form of commercial use, use or storage of an indoor product outdoors, use of the Product in conjunction with air or water-going vessels); (2) any party’s wilful misconduct, negligence, misuse, abuse, accidents, neglect, improper operation, failure to maintain, improper or negligent installation, tampering, failure to follow operating instructions, mishandling, unauthorised service (including self-performed “fi xing” or exploration of the appliance’s internal workings); (3) adjustment, alteration or modifi cation of any kind; (4) a failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fi re and building codes and regulations; (5) ordinary wear and tear, spills of food, liquid, grease accumulations, or other substances that accumulate on, in, or around the Product; and (6) any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fi res, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God. In no event shall Bosch have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, fl oors, ceilings, and other structures or objects around the Product. Also excluded from this warranty are products on which the serial numbers have been altered, defaced, or removed; service visits to teach you how to use the Product, or visits where there is nothing wrong with the Product; correction of installation problems (you are solely responsible for any structure and setting for the Product, including all electrical, plumbing or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving, etc.); and resetting of breakers or fuses.
TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT TO PRODUCT, WHETHER THE CLAIM ARISES IN CONTRACT OR TORT (INCLUDING STRICT LIABILITY, OR NEGLIGENCE) OR OTHERWISE. THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, WHETHER EXPRESS OR IMPLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, SHALL BE EFFECTIVE ONLY FOR THE PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT, “BUSINESS LOSS”, AND/OR PUNITIVE DAMAGES, LOSSES, OR EXPENSES, INCLUDING WITHOUT LIMITATION TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS, REMODELLING EXPENSES IN EXCESS OF DIRECT DAMAGES WHICH ARE DEFINITIVELY CAUSED EXCLUSIVELY BY Bosch, OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. No attempt to alter, modify or amend this warranty shall be effective unless authorised in writing by an officer of BSH.
How to Obtain Warranty Service: To obtain warranty service for your product you should contact the hotline.

Product manufactured by
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614